DEC21140A-dml

DEC21140A Ethernet controller.

conf_object, log_object, ieee_802_3_mac, ieee_802_3_mac_v3, io_memory, pci_device

cell-change: Notifier that is triggered after the object's cell was changed.
object-delete: Notifier that is triggered just before Simics object is deleted.
queue-change: Notifier that is triggered after the object's clock was changed. New clock can be obtained with the SIM_object_clock function.
state-change: Notifier on potential DML state change

config_registers: Pseudo attribute; read-only access; type: [i*]
The PCI configuration registers, each 32 bits in size.
expansion_rom_size: Optional attribute; read/write access; type: i
The size of the expansion ROM mapping.
mii_bus: Required attribute; read/write access; type: o|[os]
MII Management Bus
Required interfaces: mii_management.
pci_bus: Required attribute; read/write access; type: o|[os]
The PCI bus this device is connected to, implementing the pci-bus interface.
Required interfaces: io_memory, pci_bus.
phy: Required attribute; read/write access; type: o|[os]
Phy object
Required interfaces: ieee_802_3_phy_v2.
serial_eeprom: Required attribute; read/write access; type: o|[os]
Serial EEPROM
Required interfaces: microwire.

conf_object, log_object, signal

cell-change: Notifier that is triggered after the object's cell was changed.
object-delete: Notifier that is triggered just before Simics object is deleted.
queue-change: Notifier that is triggered after the object's clock was changed. New clock can be obtained with the SIM_object_clock function.

conf_object, log_object, signal

cell-change: Notifier that is triggered after the object's cell was changed.
object-delete: Notifier that is triggered just before Simics object is deleted.
queue-change: Notifier that is triggered after the object's clock was changed. New clock can be obtained with the SIM_object_clock function.

Control and Status Register Mapping

conf_object, log_object, bank_instrumentation_subscribe, instrumentation_order, io_memory, register_view, register_view_read_only

cell-change: Notifier that is triggered after the object's cell was changed.
object-delete: Notifier that is triggered just before Simics object is deleted.
queue-change: Notifier that is triggered after the object's clock was changed. New clock can be obtained with the SIM_object_clock function.

The PCI configuration space.

conf_object, log_object, bank_instrumentation_subscribe, instrumentation_order, io_memory, register_view, register_view_read_only

cell-change: Notifier that is triggered after the object's cell was changed.
object-delete: Notifier that is triggered just before Simics object is deleted.
queue-change: Notifier that is triggered after the object's clock was changed. New clock can be obtained with the SIM_object_clock function.