PCI Express device with Simics meta-data
conf_object, log_object, pcie_device
- cell-change
- Notifier that is triggered after the object's cell was changed.
- object-delete
- Notifier that is triggered just before Simics object is deleted.
- queue-change
- Notifier that is triggered after the object's clock was changed. New clock can be obtained with the SIM_object_clock function.
- state-change
- Notifier on potential DML state change
- bank.pcie_config
-
simics-uefi.pcie_config
- port.HRESET
-
simics-uefi.HRESET
- port.phy
-
simics-uefi.phy
-
info
– print information about the object
-
status
– print status of the object
-
caps_accesses
-
Pseudo attribute;
read-only access; type:
i
Number of accesses to capabilities data
-
detected_video_modes
-
Pseudo attribute;
read/write access; type:
[s*]|s
Video modes that were detected during BIOS run
-
package_data
-
Pseudo attribute;
read-only access; type:
[i*]
Package data stored in capabilities
-
video_mode
-
Optional attribute;
read/write access; type:
i
Video mode to be set during boot
simics-uefi
conf_object, log_object, signal
- cell-change
- Notifier that is triggered after the object's cell was changed.
- object-delete
- Notifier that is triggered just before Simics object is deleted.
- queue-change
- Notifier that is triggered after the object's clock was changed. New clock can be obtained with the SIM_object_clock function.
conf_object, log_object, bank_instrumentation_subscribe, instrumentation_order, register_view, register_view_read_only, transaction
- cell-change
- Notifier that is triggered after the object's cell was changed.
- object-delete
- Notifier that is triggered just before Simics object is deleted.
- queue-change
- Notifier that is triggered after the object's clock was changed. New clock can be obtained with the SIM_object_clock function.
-
wait-for-get
– issue an inquiry read transaction and wait for it to complete
-
wait-for-read
– issue a read transaction and wait for it to complete
-
wait-for-set
– issue an inquiry write transaction and wait for it to complete
-
wait-for-write
– issue a write transaction and wait for it to complete
-
function_number
-
Pseudo attribute;
read-only access; type:
i
PCIe function number of this bank
conf_object, log_object, transaction
- cell-change
- Notifier that is triggered after the object's cell was changed.
- object-delete
- Notifier that is triggered just before Simics object is deleted.
- queue-change
- Notifier that is triggered after the object's clock was changed. New clock can be obtained with the SIM_object_clock function.
-
wait-for-get
– issue an inquiry read transaction and wait for it to complete
-
wait-for-read
– issue a read transaction and wait for it to complete
-
wait-for-set
– issue an inquiry write transaction and wait for it to complete
-
wait-for-write
– issue a write transaction and wait for it to complete