Simics Reference Manual / 3 Commands /

3.3 Command Index

! – execute a shell command
!= – not equal
# – treat the line as a comment
$ – get the value of a CLI variable
% – read register by name, module or string formatting
& – various bitwise operators
* – arithmetic multiplication
+ – arithmetic addition
+= – add to a CLI variable
- – arithmetic subtraction
-= – subtract from a CLI variable
-> – access object attribute
/ – arithmetic division
: – unused operator
< – less than
<< – bitwise left shift
<= – less or equal
= – set a CLI variable
== – equal
> – greater than
>= – greater or equal
>> – bitwise right shift
@ – evaluate a Python statement
[
^ – bitwise XOR operation
` – evaluate a Python expression
| – bitwise OR operation
~ – bitwise not
<AM79C960>.info – print information about the object
<AM79C960>.status – print status of the object
<AM79C973>.info – print information about the object
<AM79C973>.print-pci-config-regs – deprecated print PCI configuration registers
<AM79C973>.status – print status of the object
<AT24Cxx>.info – print information about the object
<AT24Cxx>.status – print status of the object
<BCM5703C>.info – print information about the object
<BCM5703C>.print-pci-config-regs – deprecated print PCI configuration registers
<BCM5703C>.status – print status of the object
<BCM5704C>.info – print information about the object
<BCM5704C>.print-pci-config-regs – deprecated print PCI configuration registers
<BCM5704C>.status – print status of the object
<CL-PD6729>.info – print information about the object
<CL-PD6729>.print-pci-config-regs – deprecated print PCI configuration registers
<CL-PD6729>.status – print status of the object
<DEC21041>.info – print information about the object
<DEC21041>.print-pci-config-regs – deprecated print PCI configuration registers
<DEC21041>.status – print status of the object
<DEC21140A-dml>.print-pci-config-regs – deprecated print PCI configuration registers
<DEC21140A>.info – print information about the object
<DEC21140A>.print-pci-config-regs – deprecated print PCI configuration registers
<DEC21140A>.status – print status of the object
<DEC21143>.info – print information about the object
<DEC21143>.print-pci-config-regs – deprecated print PCI configuration registers
<DEC21143>.status – print status of the object
<DS12887-c>.get-date-time – get date and time
<DS12887-c>.info – print information about the object
<DS12887-c>.set-date-time – set date and time
<DS12887-c>.status – print status of the object
<DS12887-c>.trace-nvram – trace nvram updates
<DS12887>.get-date-time – get date and time
<DS12887>.info – print information about the object
<DS12887>.set-date-time – set date and time
<DS12887>.status – print status of the object
<DS323x>.get-date-time – get date and time
<DS323x>.info – print information about the object
<DS323x>.set-date-time – set date and time
<DS323x>.status – print status of the object
<ISA>.info – print information about the object
<ISA>.status – print status of the object
<NS16450>.info – print information about the object
<NS16450>.status – print status of the object
<NS16550>.info – print information about the object
<NS16550>.status – print status of the object
<TSB12LV26>.info – print information about the object
<TSB12LV26>.print-pci-config-regs – deprecated print PCI configuration registers
<TSB12LV26>.status – print status of the object
<accel-vga>.display-resolution – display resolution
<accel-vga>.info – print information about the object
<accel-vga>.print-pci-config-regs – deprecated print PCI configuration registers
<accel-vga>.redraw – redraw display
<accel-vga>.refresh-rate – set refresh rate for the display
<accel-vga>.status – print status of the object
<accel-vga>.text-dump – print text contents of display
<accel-vga>.wait-for-string – wait for substring in text mode
<address_profiler>.address-profile-data – linear map of address profiling data
<address_profiler>.address-profile-info – general info about an address profiler
<address_profiler>.address-profile-toplist – print toplist of address profiling data
<agent_handle>.agent-poll-interval – set the agent's polling interval
<agent_handle>.agent-quit – quit the agent for this handle
<agent_handle>.agent-restart – restart the Simics target agent
<agent_handle>.cd – alias for <agent_handle>.change-directory
<agent_handle>.change-directory – change this handle's working directory
<agent_handle>.delete-handle – delete this agent handle
<agent_handle>.discard-jobs – discard jobs from this agent handle
<agent_handle>.download – download file from system to host
<agent_handle>.download-dir – download directory from target to host
<agent_handle>.get-captured-output – get or print the captured job output
<agent_handle>.info – print information about the object
<agent_handle>.list-files – list target directory contents
<agent_handle>.list-jobs – list commands posted on this handle
<agent_handle>.ls – alias for <agent_handle>.list-files
<agent_handle>.print-file – print file contents on Simics CLI
<agent_handle>.print-working-directory – print this handle's working directory
<agent_handle>.pwd – alias for <agent_handle>.print-working-directory
<agent_handle>.run – execute a command on the target system
<agent_handle>.run-until-job – run simulation until job completed
<agent_handle>.status – print status of the object
<agent_handle>.target-time – set or get target system date and time
<agent_handle>.upload – upload file from host to target
<agent_handle>.upload-dir – upload directory from host to target
<agent_handle>.wait-for-job – suspend script branch until job completed
<agent_manager>.connect-to-agent – create a handle for a Simics Agent
<agent_manager>.disable – disable the manager and delete handles
<agent_manager>.enable – enable the agent_manager
<agent_manager>.info – print information about the object
<agent_manager>.list-agents – list all known Simics Agents
<agent_manager>.status – print status of the object
<apic-bus>.info – print information about the object
<apic-bus>.status – print status of the object
<apic>.info – print information about the object
<apic>.status – print status of the object
<apic_bus_v2>.info – print information about the object
<apic_bus_v2>.status – print status of the object
<arinc429_bus>.capture-start – start traffic recorder
<arinc429_bus>.capture-stop – stop traffic recorder
<arinc429_bus>.info – print information about the object
<arinc429_bus>.playback-start – start traffic generator
<arinc429_bus>.playback-stop – stop traffic generation
<arinc429_bus>.status – print status of the object
<async-bridge>.info – print information about the object
<async-bridge>.status – print status of the object
<attr-meter>.info – print information about the object
<attr-meter>.status – print status of the object
<bank_coverage_tool>.access-count – print bank access count
<bank_coverage_tool>.add-filter – add filter to the tool
<bank_coverage_tool>.add-instrumentation – add instrumentation
<bank_coverage_tool>.connect-all – connect to the banks of all devices
<bank_coverage_tool>.coverage – print bank coverages
<bank_coverage_tool>.delete – deletes instrumentation tool
<bank_coverage_tool>.disable-instrumentation – disable instrumentation
<bank_coverage_tool>.enable-instrumentation – enable instrumentation
<bank_coverage_tool>.info – print information about the object
<bank_coverage_tool>.list-providers – list-provider objects
<bank_coverage_tool>.load – load instrumented bank coverage from file
<bank_coverage_tool>.remove-filter – remove filter from the tool
<bank_coverage_tool>.remove-instrumentation – remove instrumentation
<bank_coverage_tool>.save – save instrumented bank coverage to file
<bank_coverage_tool>.status – print status of the object
<bank_instrumentation_subscribe>.bp-break-bank – set device access break
<bank_instrumentation_subscribe>.bp-run-until-bank – run until specified device access occurs
<bank_instrumentation_subscribe>.bp-trace-bank – enable tracing of device accesses
<bank_instrumentation_subscribe>.bp-wait-for-bank – wait for specified device access
<bank_patch_tool>.add-filter – add filter to the tool
<bank_patch_tool>.add-instrumentation – add instrumentation
<bank_patch_tool>.delete – deletes instrumentation tool
<bank_patch_tool>.disable-instrumentation – disable instrumentation
<bank_patch_tool>.enable-instrumentation – enable instrumentation
<bank_patch_tool>.info – print information about the object
<bank_patch_tool>.list-providers – list-provider objects
<bank_patch_tool>.remove-filter – remove filter from the tool
<bank_patch_tool>.remove-instrumentation – remove instrumentation
<bank_patch_tool>.status – print status of the object
<base-trace-mem-hier>.start – control default tracer
<base-trace-mem-hier>.stop – stop default tracer
<base-trace-mem-hier>.trace-start – alias for <base-trace-mem-hier>.start
<base-trace-mem-hier>.trace-stop – alias for <base-trace-mem-hier>.stop
<bitmask-translator>.info – print information about the object
<bitmask-translator>.status – print status of the object
<bp-manager.bank>.break – set device access break
<bp-manager.bank>.run-until – run until specified device access occurs
<bp-manager.bank>.trace – enable tracing of device accesses
<bp-manager.bank>.wait-for – wait for specified device access
<bp-manager.con-gfx>.break – set graphical breakpoint
<bp-manager.con-gfx>.run-until – run until graphical break matches
<bp-manager.con-gfx>.trace – enable tracing of graphical matches
<bp-manager.con-gfx>.wait-for – wait for graphical match
<bp-manager.con-string>.break – set string breakpoint
<bp-manager.con-string>.run-until – run until string appears
<bp-manager.con-string>.trace – enable tracing of string appearances
<bp-manager.con-string>.wait-for – wait for specified string
<bp-manager.con-string>.wait-then-write – wait for a string, then write an input string
<bp-manager.cr>.break – set break on control register access
<bp-manager.cr>.run-until – run until specified control register access
<bp-manager.cr>.trace – enable tracing of control register accesses
<bp-manager.cr>.wait-for – wait for specified control register access
<bp-manager.cycle>.break – set cycle breakpoint
<bp-manager.cycle>.run-until – run until specified cycle
<bp-manager.cycle>.trace – enable tracing of cycle points
<bp-manager.cycle>.wait-for – wait for specified cycle
<bp-manager.cycle_event>.break – set cycle event break
<bp-manager.cycle_event>.run-until – run until specified cycle event occurs
<bp-manager.cycle_event>.trace – enable tracing of cycle events
<bp-manager.cycle_event>.wait-for – wait for specified cycle event
<bp-manager.exc>.break – set break on exception
<bp-manager.exc>.run-until – run until specified exception occurs
<bp-manager.exc>.trace – enable tracing of exceptions
<bp-manager.exc>.wait-for – wait for specified exception
<bp-manager.hap>.break – set hap breakpoint
<bp-manager.hap>.run-until – run until hap triggers
<bp-manager.hap>.trace – enable tracing of hap triggers
<bp-manager.hap>.wait-for – wait for hap to trigger
<bp-manager.log>.break – set break on log output
<bp-manager.log>.run-until – run until log output appears
<bp-manager.log>.trace – enable tracing of log messages
<bp-manager.log>.wait-for – wait until log output appears
<bp-manager.magic>.break – set magic instruction break
<bp-manager.magic>.run-until – run until specified magic instruction occurs
<bp-manager.magic>.trace – enable tracing of magic instructions
<bp-manager.magic>.wait-for – wait for specified magic instruction
<bp-manager.memory>.break – set break on memory access
<bp-manager.memory>.run-until – run until specified memory access
<bp-manager.memory>.trace – enable tracing of memory accesses
<bp-manager.memory>.unbreak – remove breakpoint range
<bp-manager.memory>.wait-for – wait for specified memory access
<bp-manager.notify>.break – set notifier breakpoint
<bp-manager.notify>.run-until – run until notifier triggers
<bp-manager.notify>.trace – enable tracing of notifier triggers
<bp-manager.notify>.wait-for – wait for notifier to trigger
<bp-manager.os-awareness>.break – break on OS Awareness node changes
<bp-manager.os-awareness>.run-until – run until OS Awareness node changes
<bp-manager.os-awareness>.trace – trace OS Awareness node changes
<bp-manager.os-awareness>.wait-for – wait for OS Awareness node changes
<bp-manager.src-line>.break – add breakpoint at a source code line
<bp-manager.src-line>.run-until – run until reaching source code line
<bp-manager.src-line>.trace – enable tracing of source code line reaches
<bp-manager.src-line>.wait-for – wait until reaching source code line
<bp-manager.src-location>.break – add breakpoint at a location
<bp-manager.src-location>.run-until – run until reaching location
<bp-manager.src-location>.trace – enable tracing of location reaches
<bp-manager.src-location>.wait-for – wait until reaching location
<bp-manager.step>.break – set step breakpoint
<bp-manager.step>.run-until – run until specified step
<bp-manager.step>.trace – enable tracing of step points
<bp-manager.step>.wait-for – wait for specified step
<bp-manager.step_event>.break – set step event break
<bp-manager.step_event>.run-until – run until specified step event occurs
<bp-manager.step_event>.trace – enable tracing of step events
<bp-manager.step_event>.wait-for – wait for specified step event
<bp-manager.time>.break – set time breakpoint
<bp-manager.time>.run-until – run until specified time
<bp-manager.time>.trace – enable tracing of time points
<bp-manager.time>.wait-for – wait for specified time
<bp-manager>.info – print information about the object
<bp-manager>.status – print status of the object
<bp_manager>.delete – delete a breakpoint
<bp_manager>.disable – disable breakpoint
<bp_manager>.enable – enable breakpoint
<bp_manager>.enabled – enable or disable breakpoint
<bp_manager>.ignore-count – set number of hits of breakpoint to ignore
<bp_manager>.list – list breakpoints
<bp_manager>.list-types – list breakpoint type providers
<bp_manager>.show – show details about a breakpoint
<bp_manager>.test-trigger – test trigger breakpoint
<bp_manager>.wait-for-breakpoint – wait for breakpoint
<branch_recorder>.clean – delete all branch arcs in the branch recorder
<branch_recorder>.info – print information about the object
<branch_recorder>.print-branch-arcs – print branch arcs
<branch_recorder>.status – print status of the object
<branch_recorder_handler>.attach-branch-recorder – attach a branch recorder to a processor
<branch_recorder_handler>.detach-branch-recorder – detach a branch recorder from a processor
<branch_recorder_handler>.start-instruction-profiling – get started with instruction profiling
<break_strings_v2>.bp-break-console-string – set string breakpoint
<break_strings_v2>.bp-run-until-console-string – run until string appears
<break_strings_v2>.bp-trace-console-string – enable tracing of string appearances
<break_strings_v2>.bp-wait-for-console-string – wait for specified string
<breakpoint>.bp-break-memory – set break on memory access
<breakpoint>.bp-run-until-memory – run until specified memory access
<breakpoint>.bp-trace-memory – enable tracing of memory accesses
<breakpoint>.bp-wait-for-memory – wait for specified memory access
<breakpoint>.break – deprecated set breakpoint
<breakpoint>.tbreak – deprecated set temporary breakpoint on current processor
<breakpoint_manager>.delete – deprecated delete a breakpoint
<breakpoint_manager>.enabled – deprecated enable or disable breakpoint
<breakpoint_manager>.ignore-count – deprecated set number of hits of breakpoint to ignore
<breakpoint_manager>.list – deprecated list breakpoints
<breakpoint_manager>.show – deprecated show details about a breakpoint
<breakpoint_manager>.temporary – deprecated should the breakpoint be removed after it is triggered
<brody>.info – print information about the object
<brody>.status – print status of the object
<callback_info>.list-instrumentation-callbacks – list instrumentation callbacks
<can_endpoint>.info – print information about the object
<can_endpoint>.status – print status of the object
<can_link>.info – print information about the object
<can_link>.status – print status of the object
<can_link_impl>.info – print information about the object
<can_link_impl>.status – print status of the object
<cdrom_image>.delete – delete an unused cdrom-image object
<cdrom_image>.info – print information about the object
<cdrom_image>.status – print status of the object
<cell-and-clocks>.info – print information about the object
<cell-and-clocks>.status – print status of the object
<cell>.cpu-switch-time – get/set the time quantum for a given cell
<cell>.info – print information about the object
<cell>.status – print status of the object
<cell_and_clocks_comp>.info – print information about the object
<cell_and_clocks_comp>.status – print status of the object
<clipboard-gateway>.info – print information about the object
<clipboard-gateway>.status – print status of the object
<clock>.info – print information about the object
<clock>.status – print status of the object
<code_coverage>.add-functions – create functions map
<code_coverage>.add-path-map – add path map
<code_coverage>.add-report – add report to already existing coverage
<code_coverage>.add-source-info – include source info
<code_coverage>.add-source-only-info – include source info
<code_coverage>.clear-path-maps – clear all added path maps
<code_coverage>.combine-mappings – combine matching mappings that have different addresses
<code_coverage>.csv-output – output report in CSV format
<code_coverage>.disassemble – create disassembly for all mappings
<code_coverage>.filter-mappings – filter out mappings or source files using a pattern
<code_coverage>.html-report – write html report
<code_coverage>.info – print information about the object
<code_coverage>.lcov-output – output report to LCOV tracefile format
<code_coverage>.list-mappings – list mappings
<code_coverage>.list-path-maps – list added path maps
<code_coverage>.remove-analyzer-info – remove source info
<code_coverage>.remove-unknown-addresses – remove unknown addresses
<code_coverage>.save – save collected code coverage
<code_coverage>.status – print status of the object
<code_coverage>.stop – stop recording coverage
<component>.connect – deprecated connect components
<component>.connect-to – connect component into an existing component hierarchy
<component>.delete – delete non-instantiated components
<component>.disconnect – deprecated disconnect component connector
<component>.get-available-connector – returns the name of a free connector
<component>.get-component-object – get named object from components
<component>.get-connection – return connection information
<component>.get-connector-list – return list of connectors
<component>.get-processor-list – return list of processors
<component>.info – print information about the object
<component>.status – print status of the object
<conf_object>.break-hap – deprecated break on haps for objects
<conf_object>.get-attribute-list – deprecated return a list of all attributes
<conf_object>.get-interface-list – deprecated return a list of all interfaces for an object
<conf_object>.get-interface-port-list – deprecated return a list of all (interface) ports for an object
<conf_object>.list-attributes – deprecated list all attributes
<conf_object>.list-interfaces – list all interfaces implemented by an object
<conf_object>.log – deprecated print log entries for the object
<conf_object>.log-group – enable/disable a log group
<conf_object>.log-level – set or get the log level
<conf_object>.log-setup – configure object-specific log behavior
<conf_object>.log-size – deprecated set log buffer size
<conf_object>.log-type – set or get the current log types
<conf_object>.trace-hap – deprecated trace haps for objects
<conf_object>.unbreak-hap – deprecated break on haps for objects
<conf_object>.untrace-hap – deprecated trace haps for objects
<conf_object>.wait-for-log – deprecated deprecated
<connector>.info – print information about the object
<connector>.status – print status of the object
<context>.info – print information about the object
<context>.off – switch off context object
<context>.on – switch on context object
<context>.reverse-until-activated – reverse until context becomes active
<context>.reverse-until-deactivated – reverse until context becomes inactive
<context>.run-until-activated – run until context becomes active
<context>.run-until-deactivated – run until context becomes inactive
<context>.status – print status of the object
<context_handler>.set-context – set the current context of a CPU
<cp3_quad100tx>.info – print information about the object
<cp3_quad100tx>.status – print status of the object
<cpci_adapter>.info – print information about the object
<cpci_adapter>.status – print status of the object
<cpci_backplane>.info – print information about the object
<cpci_backplane>.status – print status of the object
<cpu-group>.info – print information about the object
<cpu_mode_filter>.add-mode – filter on specific modes
<cpu_mode_filter>.delete – remove the filter
<cpu_mode_filter>.info – print information about the object
<cpu_mode_filter>.remove-mode – stop filtering on a mode
<cpu_mode_filter>.status – print status of the object
<cpumode_software_mapper>.info – print information about the object
<cpumode_software_mapper>.status – print status of the object
<cpumode_software_tracker>.info – print information about the object
<cpumode_software_tracker>.status – print status of the object
<cpumode_software_tracker_comp>.info – print information about the object
<cpumode_software_tracker_comp>.status – print status of the object
<cycle>.bp-break-cycle – set cycle breakpoint
<cycle>.bp-break-time – set time breakpoint
<cycle>.bp-run-until-cycle – run until specified cycle
<cycle>.bp-run-until-time – run until specified time
<cycle>.bp-trace-cycle – enable tracing of cycle points
<cycle>.bp-trace-time – enable tracing of time points
<cycle>.bp-wait-for-cycle – wait for specified cycle
<cycle>.bp-wait-for-time – wait for specified time
<cycle>.cb – deprecated alias for <cycle>.cycle-break
<cycle>.cba – deprecated alias for <cycle>.cycle-break-absolute
<cycle>.cycle-break – deprecated set cycle breakpoint
<cycle>.cycle-break-absolute – deprecated set absolute cycle breakpoint
<cycle>.print-time – print number of steps and cycles executed
<cycle>.ptime – alias for <cycle>.print-time
<cycle>.wait-for-cycle – deprecated wait until reaching cycle
<cycle>.wait-for-time – deprecated wait until reaching a specified time
<cycle_event_instrumentation>.bp-break-cycle-event – set cycle event break
<cycle_event_instrumentation>.bp-run-until-cycle-event – run until specified cycle event occurs
<cycle_event_instrumentation>.bp-trace-cycle-event – enable tracing of cycle events
<cycle_event_instrumentation>.bp-wait-for-cycle-event – wait for specified cycle event
<cycle_staller>.info – print information about the object
<cycle_staller>.status – print status of the object
<data_profiler>.clear – clear data profiler
<datagram_link>.info – print information about the object
<datagram_link>.status – print status of the object
<datagram_link_endpoint>.info – print information about the object
<datagram_link_endpoint>.status – print status of the object
<datagram_link_impl>.info – print information about the object
<datagram_link_impl>.status – print status of the object
<ddr-memory-module>.info – print information about the object
<ddr-memory-module>.status – print status of the object
<ddr2-memory-module>.info – print information about the object
<ddr2-memory-module>.status – print status of the object
<ddr2_memory_module_comp>.info – print information about the object
<ddr2_memory_module_comp>.status – print status of the object
<ddr3-memory-module>.info – print information about the object
<ddr3-memory-module>.status – print status of the object
<ddr3_memory_module_comp>.info – print information about the object
<ddr3_memory_module_comp>.status – print status of the object
<ddr_memory_module_comp>.info – print information about the object
<ddr_memory_module_comp>.status – print status of the object
<deckard>.info – print information about the object
<deckard>.status – print status of the object
<dm9161>.info – print information about the object
<dm9161>.status – print status of the object
<dummy_comp>.info – print information about the object
<dummy_comp>.status – print status of the object
<dynamic_link_connector>.info – print information about the object
<dynamic_link_connector>.status – print status of the object
<e1000_spi>.info – print information about the object
<e1000_spi>.status – print status of the object
<elliot>.info – print information about the object
<elliot>.status – print status of the object
<emmett>.info – print information about the object
<emmett>.status – print status of the object
<empty_components>.info – print information about the object
<empty_components>.status – print status of the object
<empty_device_c>.info – print information about the object
<empty_device_c>.status – print status of the object
<empty_device_cc>.info – print information about the object
<empty_device_cc>.status – print status of the object
<empty_device_dml>.info – print information about the object
<empty_device_dml>.status – print status of the object
<empty_device_pyobj>.info – print information about the object
<empty_device_pyobj>.status – print status of the object
<empty_device_python>.info – print information about the object
<empty_device_python>.status – print status of the object
<empty_software_mapper>.info – print information about the object
<empty_software_mapper>.status – print status of the object
<empty_software_tracker>.info – print information about the object
<empty_software_tracker>.status – print status of the object
<empty_software_tracker_comp>.info – print information about the object
<empty_software_tracker_comp>.status – print status of the object
<etg>.info – print information about the object
<etg>.packet-rate – set or display the packets per second rate
<etg>.packet-size – set or display the packet size
<etg>.start – start generating traffic
<etg>.status – print status of the object
<etg>.stop – stop generating traffic
<etg_comp>.info – print information about the object
<etg_comp>.status – print status of the object
<etg_panel_comp>.info – print information about the object
<etg_panel_comp>.status – print status of the object
<eth-cable-link-endpoint>.info – print information about the object
<eth-cable-link-endpoint>.status – print status of the object
<eth-cable-link>.info – print information about the object
<eth-cable-link>.status – print status of the object
<eth-connector>.info – print information about the object
<eth-connector>.status – print status of the object
<eth-hub-link-endpoint>.info – print information about the object
<eth-hub-link-endpoint>.status – print status of the object
<eth-hub-link>.info – print information about the object
<eth-hub-link>.status – print status of the object
<eth-link-connector>.info – print information about the object
<eth-link-connector>.status – print status of the object
<eth-link-snoop-endpoint>.info – print information about the object
<eth-link-snoop-endpoint>.status – print status of the object
<eth-probe>.delete – delete the probe
<eth-probe>.ethereal – alias for <eth-probe>.wireshark
<eth-probe>.ethereal-stop – alias for <eth-probe>.wireshark-stop
<eth-probe>.info – print information about the object
<eth-probe>.pcap-dump – dump Ethernet traffic to a pcap file
<eth-probe>.pcap-dump-stop – stop the current dump
<eth-probe>.tcpdump – run the tcpdump program
<eth-probe>.tcpdump-stop – stop the current tcpdump capture
<eth-probe>.wireshark – run the wireshark/ethereal program
<eth-probe>.wireshark-stop – stop the current wireshark capture
<eth-switch-link-endpoint>.info – print information about the object
<eth-switch-link-endpoint>.status – print status of the object
<eth-switch-link-snoop-endpoint>.info – print information about the object
<eth-switch-link-snoop-endpoint>.status – print status of the object
<eth-switch-link>.info – print information about the object
<eth-switch-link>.status – print status of the object
<eth-transceiver>.info – print information about the object
<eth-transceiver>.status – print status of the object
<eth_injector>.info – print information about the object
<eth_injector>.start – start pcap playback
<eth_injector>.status – print status of the object
<eth_injector>.stop – stop pcap playback
<eth_injector_comp>.info – print information about the object
<eth_injector_comp>.status – print status of the object
<ethan>.info – print information about the object
<ethan>.status – print status of the object
<ethernet_cable>.connect-real-network-bridge – connect to the real network
<ethernet_cable>.connect-real-network-host – connect to the real network
<ethernet_cable>.connect-real-network-napt – enable NAPT from simulated network
<ethernet_cable>.disconnect-real-network – disconnect from the real network
<ethernet_cable>.ethereal – alias for <ethernet_cable>.wireshark
<ethernet_cable>.ethereal-stop – alias for <ethernet_cable>.wireshark-stop
<ethernet_cable>.get-free-connector – return the name of an unused connector
<ethernet_cable>.info – print information about the object
<ethernet_cable>.pcap-dump – dump Ethernet traffic to a pcap file
<ethernet_cable>.pcap-dump-stop – stop the current dump
<ethernet_cable>.set-goal-latency – set the link's goal latency in seconds
<ethernet_cable>.status – print status of the object
<ethernet_cable>.tcpdump – run the tcpdump program
<ethernet_cable>.tcpdump-stop – stop the current tcpdump capture
<ethernet_cable>.wireshark – run the wireshark/ethereal program
<ethernet_cable>.wireshark-stop – stop the current wireshark capture
<ethernet_hub>.connect-real-network-bridge – connect to the real network
<ethernet_hub>.connect-real-network-host – connect to the real network
<ethernet_hub>.connect-real-network-napt – enable NAPT from simulated network
<ethernet_hub>.disconnect-real-network – disconnect from the real network
<ethernet_hub>.ethereal – alias for <ethernet_hub>.wireshark
<ethernet_hub>.ethereal-stop – alias for <ethernet_hub>.wireshark-stop
<ethernet_hub>.get-free-connector – return the name of an unused connector
<ethernet_hub>.info – print information about the object
<ethernet_hub>.pcap-dump – dump Ethernet traffic to a pcap file
<ethernet_hub>.pcap-dump-stop – stop the current dump
<ethernet_hub>.set-goal-latency – set the link's goal latency in seconds
<ethernet_hub>.status – print status of the object
<ethernet_hub>.tcpdump – run the tcpdump program
<ethernet_hub>.tcpdump-stop – stop the current tcpdump capture
<ethernet_hub>.wireshark – run the wireshark/ethereal program
<ethernet_hub>.wireshark-stop – stop the current wireshark capture
<ethernet_switch>.connect-real-network-bridge – connect to the real network
<ethernet_switch>.connect-real-network-host – connect to the real network
<ethernet_switch>.connect-real-network-napt – enable NAPT from simulated network
<ethernet_switch>.disconnect-real-network – disconnect from the real network
<ethernet_switch>.ethereal – alias for <ethernet_switch>.wireshark
<ethernet_switch>.ethereal-stop – alias for <ethernet_switch>.wireshark-stop
<ethernet_switch>.get-free-connector – return the name of an unused connector
<ethernet_switch>.info – print information about the object
<ethernet_switch>.pcap-dump – dump Ethernet traffic to a pcap file
<ethernet_switch>.pcap-dump-stop – stop the current dump
<ethernet_switch>.set-goal-latency – set the link's goal latency in seconds
<ethernet_switch>.status – print status of the object
<ethernet_switch>.tcpdump – run the tcpdump program
<ethernet_switch>.tcpdump-stop – stop the current tcpdump capture
<ethernet_switch>.wireshark – run the wireshark/ethereal program
<ethernet_switch>.wireshark-stop – stop the current wireshark capture
<ethernet_vlan_switch>.add-vlan – add a VLAN definition and corresponding connectors
<ethernet_vlan_switch>.connect-real-network-napt – enable NAPT from simulated network
<ethernet_vlan_switch>.ethereal – alias for <ethernet_vlan_switch>.wireshark
<ethernet_vlan_switch>.ethereal-stop – alias for <ethernet_vlan_switch>.wireshark-stop
<ethernet_vlan_switch>.get-free-connector – return the name of an unused access connector
<ethernet_vlan_switch>.get-free-trunk-connector – return the name of an unused trunk connector
<ethernet_vlan_switch>.info – print information about the object
<ethernet_vlan_switch>.pcap-dump – dump Ethernet traffic to a pcap file
<ethernet_vlan_switch>.pcap-dump-stop – stop the current dump
<ethernet_vlan_switch>.set-goal-latency – set the link's goal latency in seconds
<ethernet_vlan_switch>.status – print status of the object
<ethernet_vlan_switch>.tcpdump – run the tcpdump program
<ethernet_vlan_switch>.tcpdump-stop – stop the current tcpdump capture
<ethernet_vlan_switch>.wireshark – run the wireshark/ethereal program
<ethernet_vlan_switch>.wireshark-stop – stop the current wireshark capture
<event_histogram>.add-filter – add filter to the tool
<event_histogram>.add-instrumentation – add instrumentation
<event_histogram>.clear – clear instruction sizes frequencies
<event_histogram>.delete – deletes instrumentation tool
<event_histogram>.histogram – print taken exceptions with frequencies
<event_histogram>.list-providers – list-provider objects
<event_histogram>.remove-filter – remove filter from the tool
<event_histogram>.remove-instrumentation – remove instrumentation
<exception>.bp-break-exception – set break on exception
<exception>.bp-run-until-exception – run until specified exception occurs
<exception>.bp-trace-exception – enable tracing of exceptions
<exception>.bp-wait-for-exception – wait for specified exception
<exception>.break-exception – deprecated break on CPU exceptions
<exception>.list-exceptions – list exceptions on a processor
<exception>.trace-exception – deprecated trace exceptions
<exception>.unbreak-exception – deprecated break on CPU exceptions
<exception>.untrace-exception – deprecated trace exceptions
<exception>.wait-for-exception – deprecated wait until a processor exception happens
<exception_histogram>.add-filter – add filter to the tool
<exception_histogram>.add-instrumentation – add instrumentation
<exception_histogram>.clear – clear instruction sizes frequencies
<exception_histogram>.delete – deletes instrumentation tool
<exception_histogram>.disable-instrumentation – disable instrumentation
<exception_histogram>.enable-instrumentation – enable instrumentation
<exception_histogram>.histogram – print taken exceptions with frequencies
<exception_histogram>.info – print information about the object
<exception_histogram>.list-providers – list-provider objects
<exception_histogram>.remove-filter – remove filter from the tool
<exception_histogram>.remove-instrumentation – remove instrumentation
<exception_histogram>.status – print status of the object
<firewire_bus>.info – print information about the object
<firewire_bus>.status – print status of the object
<floppy-drive>.info – print information about the object
<floppy-drive>.status – print status of the object
<frankie_carbone>.info – print information about the object
<frankie_carbone>.status – print status of the object
<frequency_bus>.info – print information about the object
<frequency_bus>.status – print status of the object
<ftp-control>.info – print information about the object
<ftp-control>.status – print status of the object
<ftp-data>.info – print information about the object
<ftp-data>.status – print status of the object
<ftp-service>.info – print information about the object
<ftp-service>.status – print status of the object
<g-cache>.add-profiler – add a profiler to the cache
<g-cache>.info – print information about the object
<g-cache>.line-status – print the cache lines status
<g-cache>.remove-profiler – remove a profiler from the cache
<g-cache>.reset-cache-lines – reset all the cache lines
<g-cache>.reset-statistics – reset the cache statistics
<g-cache>.statistics – print the cache statistics
<g-cache>.status – print status of the object
<gdb-remote>.disconnect – disconnect from the remote gdb
<gdb-remote>.follow-context – deprecated follow context
<gdb-remote>.info – print information about the object
<gdb-remote>.signal – tell remote gdb we got a signal
<gdb-remote>.target – set target CPU for gdb connection
<generic-flash-memory>.accept-inquiries – deprecated set whether or not to handle inquiry accesses
<generic-flash-memory>.info – print information about the object
<generic-flash-memory>.status – print status of the object
<generic-mmc-card>.info – print information about the object
<generic-mmc-card>.status – print status of the object
<generic_eth_phy>.info – print information about the object
<generic_eth_phy>.status – print status of the object
<generic_pcie_switch>.info – print information about the object
<generic_pcie_switch>.status – print status of the object
<generic_pcie_switch_port>.info – print information about the object
<generic_pcie_switch_port>.print-pci-config-regs – deprecated print PCI configuration registers
<generic_pcie_switch_port>.status – print status of the object
<generic_spi_flash>.info – print information about the object
<generic_spi_flash>.status – print status of the object
<gertie>.info – print information about the object
<gertie>.status – print status of the object
<gfx-console>.auto-release – get/set auto-release flag
<gfx-console>.break – break on a graphics event specified by filename
<gfx-console>.close – close console window
<gfx-console>.delete – delete breakpoint
<gfx-console>.disable-input – ignore console input
<gfx-console>.disable-visual-feedback – disable visual feedback
<gfx-console>.enable-input – enable console input
<gfx-console>.enable-visual-feedback – enable visual feedback
<gfx-console>.grab-setup – set grab button and modifier
<gfx-console>.input – send string to a console
<gfx-console>.open – open console window
<gfx-console>.refresh – refresh console
<gfx-console>.save-bmp – save BMP image
<gfx-console>.save-break-xy – specify and save a graphical breakpoint
<gfx-console>.save-png – save PNG image
<gfx-frontend-winsome>.info – print information about the object
<gfx-frontend-winsome>.status – print status of the object
<gfx_break>.bp-break-gfx – set graphical breakpoint
<gfx_break>.bp-run-until-gfx – run until graphical break matches
<gfx_break>.bp-trace-gfx – enable tracing of graphical matches
<gfx_break>.bp-wait-for-gfx – wait for graphical match
<gfx_console_comp>.info – print information about the object
<gfx_console_comp>.status – print status of the object
<gml_link>.info – print information about the object
<gml_link>.status – print status of the object
<gml_link_endpoint>.info – print information about the object
<gml_link_endpoint>.status – print status of the object
<gml_link_impl>.info – print information about the object
<gml_link_impl>.status – print status of the object
<godzilla>.info – print information about the object
<godzilla>.status – print status of the object
<graphcon>.break – deprecated set a string to break on
<graphcon>.break-gfx – deprecated break on a graphics event
<graphcon>.capture-start – capture output to file
<graphcon>.capture-stop – stop output capture to file
<graphcon>.dimming – get/set dimming status
<graphcon>.get-pixel – read pixel value
<graphcon>.gfx-break-info – return information about a graphical breakpoint
<graphcon>.gfx-break-match – determine if graphical breakpoint currently matches
<graphcon>.gfx-break-png – export graphical breakpoint data to a PNG file
<graphcon>.grab-setup – set grab button and modifier
<graphcon>.hide – hide the console window
<graphcon>.info – print information about the object
<graphcon>.input – send string to a console
<graphcon>.input-file – input a file into a console
<graphcon>.list-break-strings – deprecated list all active string breakpoints
<graphcon>.list-gfx-breaks – deprecated list all active graphical breakpoints
<graphcon>.save-break-xy – specify and save a graphical breakpoint
<graphcon>.screenshot – save screen as PNG or BMP
<graphcon>.set-pixel – write pixel value
<graphcon>.show – display the console window
<graphcon>.status – print status of the object
<graphcon>.unbreak – deprecated stop breaking on string
<graphcon>.unbreak-gfx – deprecated delete graphical breakpoint
<graphcon>.vnc-setup – setup VNC connection
<graphcon>.vnc-status – return VNC connection data
<graphcon>.wait-for-gfx-break – deprecated wait for a graphical breakpoint in a script branch
<graphcon>.wait-for-pixel-value – real pixel value
<graphcon>.wait-for-string – deprecated wait for a string in a script branch
<graphcon>.wait-then-write – deprecated wait for a string, then write an input string
<graphics_console_comp>.info – print information about the object
<graphics_console_comp>.status – print status of the object
<graphics_console_comp>.switch-to-text-console – replace the console with a text console
<hal>.info – print information about the object
<hal>.status – print status of the object
<hap-meter>.info – print information about the object
<hap-meter>.listen-for-exceptions – listen for exception haps
<hap-meter>.listen-for-hap – listen for a specified hap
<hap-meter>.status – print status of the object
<host_core>.info – print information about the object
<host_core>.status – print status of the object
<host_processor>.info – print information about the object
<host_processor>.status – print status of the object
<host_serial_console_comp>.info – print information about the object
<host_serial_console_comp>.status – print status of the object
<host_serial_console_comp>.switch-to-telnet-console – switch to telnet console
<host_serial_console_comp>.switch-to-text-console – replace the console with a text console
<host_system>.info – print information about the object
<host_system>.status – print status of the object
<hostfs>.info – print information about the object
<hostfs>.root – get or set the hostfs root directory
<hostfs>.status – print status of the object
<hunt>.info – print information about the object
<hunt>.status – print status of the object
<hypersim-pattern-matcher>.delete-pattern – remove a pattern from the matcher
<hypersim-pattern-matcher>.info – print information about the object
<hypersim-pattern-matcher>.status – print status of the object
<i210>.info – print information about the object
<i210>.print-pci-config-regs – deprecated print PCI configuration registers
<i210>.status – print status of the object
<i210_comp>.info – print information about the object
<i210_comp>.status – print status of the object
<i21150>.info – print information about the object
<i21150>.print-pci-config-regs – deprecated print PCI configuration registers
<i21150>.status – print status of the object
<i21152>.info – print information about the object
<i21152>.print-pci-config-regs – deprecated print PCI configuration registers
<i21152>.status – print status of the object
<i21154>.info – print information about the object
<i21154>.print-pci-config-regs – deprecated print PCI configuration registers
<i21154>.status – print status of the object
<i2c-bus>.info – print information about the object
<i2c-bus>.status – print status of the object
<i2c-link-endpoint>.info – print information about the object
<i2c-link-endpoint>.status – print status of the object
<i2c-link-impl>.info – print information about the object
<i2c-link-impl>.status – print status of the object
<i2c_link_v1>.info – print information about the object
<i2c_link_v1>.status – print status of the object
<i2c_link_v2>.info – print information about the object
<i2c_link_v2>.status – print status of the object
<i2c_slave_v2_to_bus_adapter>.info – print information about the object
<i2c_slave_v2_to_bus_adapter>.status – print status of the object
<i2c_to_i3c_adapter>.info – print information about the object
<i2c_to_i3c_adapter>.status – print status of the object
<i2c_wire>.info – print information about the object
<i2c_wire>.status – print status of the object
<i3c_bus>.info – print information about the object
<i3c_bus>.status – print status of the object
<i3c_cable>.info – print information about the object
<i3c_cable>.status – print status of the object
<i3c_cable_endpoint>.info – print information about the object
<i3c_cable_endpoint>.status – print status of the object
<i3c_cable_impl>.info – print information about the object
<i3c_cable_impl>.status – print status of the object
<i3c_link>.info – print information about the object
<i3c_link>.status – print status of the object
<i3c_link_endpoint>.info – print information about the object
<i3c_link_endpoint>.status – print status of the object
<i3c_link_impl>.info – print information about the object
<i3c_link_impl>.status – print status of the object
<i3c_wire>.info – print information about the object
<i3c_wire>.status – print status of the object
<i8042>.ctrl-alt-del – send ctrl-alt-del to console
<i8042>.info – print information about the object
<i8042>.key-down – send key down event
<i8042>.key-press – send key press
<i8042>.key-up – send key up event
<i8042>.left-button – set button state
<i8042>.middle-button – set button state
<i8042>.mouse-down – move mouse
<i8042>.mouse-left – move mouse
<i8042>.mouse-right – move mouse
<i8042>.mouse-up – move mouse
<i8042>.right-button – set button state
<i8042>.status – print status of the object
<i82077>.eject-floppy – eject floppy
<i82077>.info – print information about the object
<i82077>.insert-floppy – insert floppy in drive
<i82077>.status – print status of the object
<i8237x2>.info – print information about the object
<i8237x2>.status – print status of the object
<i82543>.info – print information about the object
<i82543>.print-pci-config-regs – deprecated print PCI configuration registers
<i82543>.status – print status of the object
<i82546>.info – print information about the object
<i82546>.print-pci-config-regs – deprecated print PCI configuration registers
<i82546>.status – print status of the object
<i8254>.info – print information about the object
<i8254>.status – print status of the object
<i82559>.info – print information about the object
<i82559>.print-pci-config-regs – deprecated print PCI configuration registers
<i82559>.status – print status of the object
<i82571EB_v2>.info – print information about the object
<i82571EB_v2>.print-pci-config-regs – deprecated print PCI configuration registers
<i82571EB_v2>.status – print status of the object
<i82571EB_v2_comp>.info – print information about the object
<i82571EB_v2_comp>.status – print status of the object
<i82574_v2>.info – print information about the object
<i82574_v2>.print-pci-config-regs – deprecated print PCI configuration registers
<i82574_v2>.status – print status of the object
<i82574_v2_comp>.info – print information about the object
<i82574_v2_comp>.status – print status of the object
<i82576EB_v2>.info – print information about the object
<i82576EB_v2>.print-pci-config-regs – deprecated print PCI configuration registers
<i82576EB_v2>.status – print status of the object
<i82576EB_v2_comp>.info – print information about the object
<i82576EB_v2_comp>.status – print status of the object
<i82583V_v2>.info – print information about the object
<i82583V_v2>.print-pci-config-regs – deprecated print PCI configuration registers
<i82583V_v2>.status – print status of the object
<i82583V_v2_comp>.info – print information about the object
<i82583V_v2_comp>.status – print status of the object
<i8259x2>.info – print information about the object
<i8259x2>.status – print status of the object
<ide-cdrom>.eject – eject media from CD-ROM drive
<ide-cdrom>.info – print information about the object
<ide-cdrom>.insert – insert media in CD-ROM drive
<ide-disk>.add-diff-file – add a diff file to the image
<ide-disk>.add-diff-partial-file – alias for <ide-disk>.add-partial-diff-file
<ide-disk>.add-partial-diff-file – add a partial diff file to the image
<ide-disk>.create-partition – deprecated add a partition to disk
<ide-disk>.default-translation – get or set the default CHS translation
<ide-disk>.info – print information about the object
<ide-disk>.print-partition-info – deprecated print info about a pc-style partition
<ide-disk>.print-partition-table – print the partition table
<ide-disk>.save-diff-file – save diff file to disk
<ide-disk>.save-mbr-partition – save an MBR partition to a file
<ide>.info – print information about the object
<ide>.status – print status of the object
<ide_cdrom_comp>.info – print information about the object
<ide_cdrom_comp>.status – print status of the object
<ide_disk_comp>.info – print information about the object
<ide_disk_comp>.status – print status of the object
<ieee_802_15_4_link>.get-free-connector – return the name of an unused connector
<ieee_802_15_4_link>.info – print information about the object
<ieee_802_15_4_link>.status – print status of the object
<ieee_802_15_4_link_endpoint>.info – print information about the object
<ieee_802_15_4_link_endpoint>.status – print status of the object
<ieee_802_15_4_link_impl>.info – print information about the object
<ieee_802_15_4_link_impl>.status – print status of the object
<ieee_802_15_4_probe>.ethereal – alias for <ieee_802_15_4_probe>.wireshark
<ieee_802_15_4_probe>.ethereal-stop – alias for <ieee_802_15_4_probe>.wireshark-stop
<ieee_802_15_4_probe>.info – print information about the object
<ieee_802_15_4_probe>.pcap-dump – dump network traffic to a file
<ieee_802_15_4_probe>.pcap-dump-stop – stop the current dump
<ieee_802_15_4_probe>.status – print status of the object
<ieee_802_15_4_probe>.tcpdump – run the tcpdump program
<ieee_802_15_4_probe>.tcpdump-stop – stop the current tcpdump capture
<ieee_802_15_4_probe>.wireshark – run the wireshark/ethereal program
<ieee_802_15_4_probe>.wireshark-stop – stop the current wireshark capture
<image>.add-diff-file – add a diff file to the image
<image>.add-partial-diff-file – add a partial diff file to the image
<image>.clear-files – clear the list of files for an image
<image>.get – get bytes from image
<image>.info – print information about the object
<image>.list-files – list files representing the contents of an image
<image>.load-file – load file into an image
<image>.load-intel-hex – load Intel HEX file into an image
<image>.load-intel-obj – load Intel .obj or .32.obj file into an image
<image>.load-vmem – load Verilog VMEM file into memory
<image>.print-image-memory-stats – image memory usage statistics
<image>.save – save image to disk
<image>.save-diff-file – save changes since last checkpoint
<image>.save-file – save memory contents to a binary file
<image>.save-intel-32-obj – save memory contents to an Intel .32.obj file
<image>.save-intel-hex – save memory contents to an Intel HEX file
<image>.save-intel-obj – save memory contents to an Intel .obj file
<image>.save-vmem – save VMEM file of memory
<image>.set – set bytes in image to specified value
<image>.status – print status of the object
<image>.x – examine image data
<instruction_count>.add-filter – add filter to the tool
<instruction_count>.add-instrumentation – add instrumentation
<instruction_count>.clear – clear instruction counts
<instruction_count>.delete – deletes instrumentation tool
<instruction_count>.disable-instrumentation – disable instrumentation
<instruction_count>.enable-instrumentation – enable instrumentation
<instruction_count>.icount – print instruction count
<instruction_count>.info – print information about the object
<instruction_count>.list-providers – list-provider objects
<instruction_count>.remove-filter – remove filter from the tool
<instruction_count>.remove-instrumentation – remove instrumentation
<instruction_count>.status – print status of the object
<instruction_fetch>.ifm – alias for <instruction_fetch>.instruction-fetch-mode
<instruction_fetch>.instruction-fetch-mode – set or get current mode for instruction fetching
<instruction_histogram>.add-filter – add filter to the tool
<instruction_histogram>.add-instrumentation – add instrumentation
<instruction_histogram>.clear – remove old data
<instruction_histogram>.delete – deletes instrumentation tool
<instruction_histogram>.disable-instrumentation – disable instrumentation
<instruction_histogram>.enable-instrumentation – enable instrumentation
<instruction_histogram>.histogram – print instruction histogram
<instruction_histogram>.info – print information about the object
<instruction_histogram>.list-providers – list-provider objects
<instruction_histogram>.remove-filter – remove filter from the tool
<instruction_histogram>.remove-instrumentation – remove instrumentation
<instruction_histogram>.status – print status of the object
<instrumentation_filter_aggregator>.info – print information about the object
<instrumentation_filter_aggregator>.status – print status of the object
<instrumentation_order>.instrumentation-move – reorder instrumentation connections
<instrumentation_order>.instrumentation-order – list instrumentation order for object
<interrupt_to_signal>.info – print information about the object
<interrupt_to_signal>.status – print status of the object
<io-apic>.info – print information about the object
<io-apic>.status – print status of the object
<isa-lance>.info – print information about the object
<isa-lance>.status – print status of the object
<isa-vga>.info – print information about the object
<isa-vga>.status – print status of the object
<korben>.info – print information about the object
<korben>.status – print status of the object
<leader>.info – print information about the object
<leader>.status – print status of the object
<leeloo>.info – print information about the object
<leeloo>.status – print status of the object
<legacy-upstream-pcie-adapter>.info – print information about the object
<legacy-upstream-pcie-adapter>.status – print status of the object
<legacy_upstream_pcie_adapter_comp>.info – print information about the object
<legacy_upstream_pcie_adapter_comp>.status – print status of the object
<linux_mapper>.info – print information about the object
<linux_mapper>.log-syscalls – start logging system calls
<linux_mapper>.status – print status of the object
<linux_tracker>.detect-parameters – try to detect settings for the Linux tracker
<linux_tracker>.info – print information about the object
<linux_tracker>.list-kernel-modules – list kernel modules
<linux_tracker>.set-kernel-modules-path – set base path for kernel modules
<linux_tracker>.status – print status of the object
<linux_tracker_comp>.detect-parameters – try to detect settings for the Linux tracker
<linux_tracker_comp>.info – print information about the object
<linux_tracker_comp>.list-kernel-modules – list kernel modules
<linux_tracker_comp>.log-syscalls – start logging system calls
<linux_tracker_comp>.set-kernel-modules-path – set base path for kernel modules
<linux_tracker_comp>.status – print status of the object
<magic_pipe>.info – print information about the object
<magic_pipe>.status – print status of the object
<maria_singer>.info – print information about the object
<maria_singer>.status – print status of the object
<marvin>.info – print information about the object
<marvin>.status – print status of the object
<mcfly>.info – print information about the object
<mcfly>.status – print status of the object
<mem-traffic-meter>.info – print information about the object
<mem-traffic-meter>.status – print status of the object
<memory-space>.add-map – map device in a memory-space
<memory-space>.del-map – remove device map from a memory-space
<memory-space>.info – print information about the object
<memory-space>.map – print memory map
<memory-space>.status – print status of the object
<memory_profiler>.add-filter – add filter to the tool
<memory_profiler>.add-instrumentation – add instrumentation
<memory_profiler>.add-memory-profiler – add a memory profiler to the processor
<memory_profiler>.delete – deletes instrumentation tool
<memory_profiler>.disable-instrumentation – disable instrumentation
<memory_profiler>.enable-instrumentation – enable instrumentation
<memory_profiler>.info – print information about the object
<memory_profiler>.list-memory-profilers – list memory profilers connected to the processor
<memory_profiler>.list-providers – list-provider objects
<memory_profiler>.profile – print memory profile
<memory_profiler>.remove-filter – remove filter from the tool
<memory_profiler>.remove-instrumentation – remove instrumentation
<memory_profiler>.remove-memory-profiler – remove a memory profiler from the processor
<memory_profiler>.status – print status of the object
<memory_space>.debug – get debug object
<memory_space>.examine-memory – alias for <memory_space>.x
<memory_space>.get – get value from physical address without side-effects
<memory_space>.get-string – read a string from memory
<memory_space>.load-binary – load binary (executable) file into memory
<memory_space>.load-file – load file into memory
<memory_space>.load-intel-hex – load Intel HEX file into memory
<memory_space>.load-intel-obj – load Intel .obj or .32.obj file into memory
<memory_space>.load-vmem – load Verilog VMEM file into memory
<memory_space>.read – read value from physical address
<memory_space>.read-string – read a string from memory
<memory_space>.save-file – save memory contents to a binary file
<memory_space>.save-intel-32-obj – save memory contents to an Intel .32.obj file
<memory_space>.save-intel-hex – save memory contents to an Intel HEX file
<memory_space>.save-intel-obj – save memory contents to an Intel .obj file
<memory_space>.save-vmem – save VMEM file of memory
<memory_space>.set – set physical address to specified value without side-effects
<memory_space>.set-string – write a string to memory
<memory_space>.write – set physical address to specified value
<memory_space>.write-string – write a string to memory
<memory_space>.x – examine raw memory contents
<micron_mtfc128gap_emmc_card>.info – print information about the object
<micron_mtfc128gap_emmc_card>.status – print status of the object
<micron_mtfc16gap_emmc_card>.info – print information about the object
<micron_mtfc16gap_emmc_card>.status – print status of the object
<micron_mtfc2ggqdi_emmc_card>.info – print information about the object
<micron_mtfc2ggqdi_emmc_card>.status – print status of the object
<micron_mtfc32gap_emmc_card>.info – print information about the object
<micron_mtfc32gap_emmc_card>.status – print status of the object
<micron_mtfc4gacaeam_emmc_card>.info – print information about the object
<micron_mtfc4gacaeam_emmc_card>.status – print status of the object
<micron_mtfc4ggqdi_emmc_card>.info – print information about the object
<micron_mtfc4ggqdi_emmc_card>.status – print status of the object
<micron_mtfc4ggqdi_sdhc_card>.info – print information about the object
<micron_mtfc4ggqdi_sdhc_card>.status – print status of the object
<micron_mtfc64gap_emmc_card>.info – print information about the object
<micron_mtfc64gap_emmc_card>.status – print status of the object
<micron_mtfc64ggqdi_sdhc_card>.info – print information about the object
<micron_mtfc64ggqdi_sdhc_card>.status – print status of the object
<micron_mtfc8gacaeam_emmc_card>.info – print information about the object
<micron_mtfc8gacaeam_emmc_card>.status – print status of the object
<micron_mtfc8gam_emmc_card>.info – print information about the object
<micron_mtfc8gam_emmc_card>.status – print status of the object
<mii-management-bus>.info – print information about the object
<mii-management-bus>.status – print status of the object
<mii-transceiver>.info – print information about the object
<mii-transceiver>.status – print status of the object
<mmc_card>.info – print information about the object
<mmc_card>.status – print status of the object
<mmc_card_comp>.info – print information about the object
<mmc_card_comp>.status – print status of the object
<motherboard_x86_simple>.info – print information about the object
<motherboard_x86_simple>.status – print status of the object
<motherboard_x86_simple_no_apic>.info – print information about the object
<motherboard_x86_simple_no_apic>.status – print status of the object
<ms1553-link-v2-endpoint>.info – print information about the object
<ms1553-link-v2-endpoint>.status – print status of the object
<ms1553-link-v2-impl>.info – print information about the object
<ms1553-link-v2-impl>.status – print status of the object
<ms1553-link-v2-snoop-endpoint>.info – print information about the object
<ms1553-link-v2-snoop-endpoint>.status – print status of the object
<ms1553_link_v2>.get-free-connector – return the name of an unused connector
<ms1553_link_v2>.info – print information about the object
<ms1553_link_v2>.status – print status of the object
<mtprof>.cellstat – display cell profiling information
<mtprof>.disable – disable multithreaded simulation profiling
<mtprof>.enable – enable multithreaded simulation profiling
<mtprof>.info – print information about the object
<mtprof>.modelstat – display ideal execution time on a sufficiently parallel host
<mtprof>.save-data – save profiling data to file
<mtprof>.status – print status of the object
<nemo>.info – print information about the object
<nemo>.status – print status of the object
<nfs_server>.add-export – add NFS export
<nfs_server>.info – print information about the object
<nfs_server>.remove-export – remove NFS export
<nfs_server>.status – print status of the object
<nikita>.info – print information about the object
<nikita>.status – print status of the object
<onfi_flash>.info – print information about the object
<onfi_flash>.status – print status of the object
<os_awareness>.active-node – list the active nodes
<os_awareness>.break-enter – deprecated break the simulation when a processor becomes active on the node
<os_awareness>.break-exit – deprecated break the simulation when a processor becomes inactive on the node
<os_awareness>.delete-tracker – delete tracker component
<os_awareness>.disable-tracker – stop using software tracking
<os_awareness>.enable-tracker – enable software tracking
<os_awareness>.find – find a node
<os_awareness>.info – print information about the object
<os_awareness>.insert-tracker – insert a new child tracker
<os_awareness>.list – list all processes/tasks
<os_awareness>.node-info – print all properties of a software node
<os_awareness>.node-tree – list software node tree
<os_awareness>.status – print status of the object
<os_awareness>.unbreak – deprecated cancel a software breakpoint
<os_awareness>.wait-for-activated – deprecated wait for a processor to become activated on the node
<os_awareness>.wait-for-deactivated – deprecated wait for a processor to become deactivated on the node
<osa_admin_emulator>.info – print information about the object
<osa_admin_emulator>.status – print status of the object
<osa_component>.bp-break – break on OS Awareness node changes
<osa_component>.bp-run-until – run until OS Awareness node changes
<osa_component>.bp-trace – trace OS Awareness node changes
<osa_component>.bp-wait-for – wait for OS Awareness node changes
<osa_parameters>.load-parameters – load tracker parameter settings
<osa_parameters>.save-parameters – save parameters
<osa_parameters>.supports-parameters – check if supported
<partition_mapper>.info – print information about the object
<partition_mapper>.status – print status of the object
<partition_tracker>.info – print information about the object
<partition_tracker>.status – print status of the object
<partition_tracker_comp>.info – print information about the object
<partition_tracker_comp>.insert-empty-partition – insert a partition that is not associated with any tracker
<partition_tracker_comp>.insert-tracker – insert a new child tracker
<partition_tracker_comp>.remove-partition – remove a partition
<partition_tracker_comp>.status – print status of the object
<pc-dual-serial-ports>.info – print information about the object
<pc-dual-serial-ports>.status – print status of the object
<pc-floppy-controller>.info – print information about the object
<pc-floppy-controller>.status – print status of the object
<pc-quad-serial-ports>.info – print information about the object
<pc-quad-serial-ports>.status – print status of the object
<pc-shadow>.info – print information about the object
<pc-shadow>.status – device status
<pc-single-parallel-port>.info – print information about the object
<pc-single-parallel-port>.status – print status of the object
<pci-accel-vga>.info – print information about the object
<pci-accel-vga>.status – print status of the object
<pci-am79c973>.info – print information about the object
<pci-am79c973>.status – print status of the object
<pci-bcm5703c>.info – print information about the object
<pci-bcm5703c>.status – print status of the object
<pci-bcm5704c>.info – print information about the object
<pci-bcm5704c>.status – print status of the object
<pci-bus>.info – print information about the object
<pci-dec21041>.info – print information about the object
<pci-dec21041>.status – print status of the object
<pci-dec21140a-dml>.info – print information about the object
<pci-dec21140a-dml>.status – print status of the object
<pci-dec21140a>.info – print information about the object
<pci-dec21140a>.status – print status of the object
<pci-dec21143>.info – print information about the object
<pci-dec21143>.status – print status of the object
<pci-i21152>.info – print information about the object
<pci-i21152>.status – print status of the object
<pci-i82543gc>.info – print information about the object
<pci-i82543gc>.status – print status of the object
<pci-i82546bg>.info – print information about the object
<pci-i82546bg>.status – print status of the object
<pci-i82559>.info – print information about the object
<pci-i82559>.status – print status of the object
<pci-pd6729>.info – print information about the object
<pci-pd6729>.status – print status of the object
<pci-tsb12lv26>.info – print information about the object
<pci-tsb12lv26>.status – print status of the object
<pci-vga>.info – print information about the object
<pci-vga>.status – print status of the object
<pci_accel_vga_comp>.info – print information about the object
<pci_accel_vga_comp>.status – print status of the object
<pci_am79c973_comp>.info – print information about the object
<pci_am79c973_comp>.status – print status of the object
<pci_bcm5703c_comp>.info – print information about the object
<pci_bcm5703c_comp>.status – print status of the object
<pci_bcm5704c_comp>.info – print information about the object
<pci_bcm5704c_comp>.status – print status of the object
<pci_dec21041_comp>.info – print information about the object
<pci_dec21041_comp>.status – print status of the object
<pci_dec21140>.info – print information about the object
<pci_dec21140>.status – print status of the object
<pci_dec21140_panel>.info – print information about the object
<pci_dec21140_panel>.status – print status of the object
<pci_dec21140a_comp>.info – print information about the object
<pci_dec21140a_comp>.status – print status of the object
<pci_dec21143_comp>.info – print information about the object
<pci_dec21143_comp>.status – print status of the object
<pci_i21152_comp>.info – print information about the object
<pci_i21152_comp>.status – print status of the object
<pci_i82543gc_comp>.info – print information about the object
<pci_i82543gc_comp>.status – print status of the object
<pci_i82546bg_comp>.info – print information about the object
<pci_i82546bg_comp>.status – print status of the object
<pci_i82559_comp>.info – print information about the object
<pci_i82559_comp>.status – print status of the object
<pci_pd6729_comp>.info – print information about the object
<pci_pd6729_comp>.status – print status of the object
<pci_proxy>.info – print information about the object
<pci_proxy>.status – print status of the object
<pci_proxy_mf>.info – print information about the object
<pci_proxy_mf>.status – print status of the object
<pci_vga_comp>.info – print information about the object
<pci_vga_comp>.status – print status of the object
<pcie-bus>.info – print information about the object
<pcie-downstream-port-legacy.cfg>.map – print memory map
<pcie-downstream-port-legacy.io>.map – print memory map
<pcie-downstream-port-legacy.mem>.map – print memory map
<pcie-downstream-port-legacy.msg>.map – print memory map
<pcie-downstream-port-legacy>.info – print information about the object
<pcie-downstream-port-legacy>.status – print status of the object
<pcie-downstream-port.cfg>.map – print memory map
<pcie-downstream-port.io>.map – print memory map
<pcie-downstream-port.mem>.map – print memory map
<pcie-downstream-port.msg>.map – print memory map
<pcie-downstream-port>.info – print information about the object
<pcie-downstream-port>.status – print status of the object
<pcmcia_flash_disk_comp>.info – print information about the object
<pcmcia_flash_disk_comp>.status – print status of the object
<persistent-ram>.info – print information about the object
<persistent-ram>.status – print status of the object
<phy-mii-transceiver>.info – print information about the object
<phy-mii-transceiver>.status – print status of the object
<phy_comp>.info – print information about the object
<phy_comp>.status – print status of the object
<pipe_manager>.info – print information about the object
<pipe_manager>.status – print status of the object
<port-forward-outgoing-server>.status – print status of the object
<port-space>.add-map – map device in a port-space
<port-space>.del-map – remove device map from a port-space
<port-space>.info – print information about the object
<port-space>.map – print port map
<port-space>.status – print status of the object
<port_space>.get – get value from physical address without side-effects
<port_space>.get-string – read a string from memory
<port_space>.read – read value from physical address
<port_space>.read-string – read a string from memory
<port_space>.set – set physical address to specified value without side-effects
<port_space>.set-string – write a string to memory
<port_space>.write – set physical address to specified value
<port_space>.write-string – write a string to memory
<preferences>.info – print information about the object
<preferences>.status – print status of the object
<probe_cell_io_access>.info – print information about the object
<probe_cell_io_access>.status – print status of the object
<probe_cycle_histogram>.info – print information about the object
<probe_cycle_histogram>.status – print status of the object
<probe_cycle_triggered>.info – print information about the object
<probe_cycle_triggered>.status – print status of the object
<probe_host_cpu_load>.info – print information about the object
<probe_host_cpu_load>.status – print status of the object
<probe_host_idle_time>.info – print information about the object
<probe_host_idle_time>.status – print status of the object
<probe_host_work_time>.info – print information about the object
<probe_host_work_time>.status – print status of the object
<probe_io_probes>.info – print information about the object
<probe_io_probes>.status – print status of the object
<probe_monitor>.add-probe – add a probe to the monitor
<probe_monitor>.delete – delete monitor
<probe_monitor>.export-json – save probe data in json format
<probe_monitor>.html-report – produce an HTML report with graphs and performance data
<probe_monitor>.info – print information about the object
<probe_monitor>.merge-json – save probe data in json format
<probe_monitor>.plot-graph – produce a plot of probes
<probe_monitor>.print-history – print sample history of the probes
<probe_monitor>.profile-probes – fake samples and do a python profile of the collection
<probe_monitor>.remove-probe – remove probe from monitor
<probe_monitor>.sampling-settings – set sampling settings
<probe_monitor>.start – start the monitor
<probe_monitor>.status – print status of the object
<probe_monitor>.stop – stop the monitor
<probe_monitor>.summary – show total summary of probes
<probe_monitor>.table-settings – set the table settings
<probe_sim_virtual_time_ps>.info – print information about the object
<probe_sim_virtual_time_ps>.status – print status of the object
<probe_streamer>.add-probe – add a probe to the streamer
<probe_streamer>.delete – delete streamer
<probe_streamer>.info – print information about the object
<probe_streamer>.remove-probe – remove probe from streamer
<probe_streamer>.sampling-settings – set sampling settings
<probe_streamer>.start – start the streamer
<probe_streamer>.status – print status of the object
<probe_streamer>.stop – stop the streamer
<probe_streamer>.summary – show total summary of probes
<probe_system_perfmeter>.add-probe – add a probe to the system-perfmeter
<probe_system_perfmeter>.delete – delete system-perfmeter
<probe_system_perfmeter>.export-json – save probe data in json format
<probe_system_perfmeter>.html-report – produce an HTML report with graphs and performance data
<probe_system_perfmeter>.info – print information about the object
<probe_system_perfmeter>.merge-json – save probe data in json format
<probe_system_perfmeter>.plot-graph – produce a plot of probes
<probe_system_perfmeter>.print-history – print sample history of the probes
<probe_system_perfmeter>.profile-probes – fake samples and do a python profile of the collection
<probe_system_perfmeter>.remove-probe – remove probe from system-perfmeter
<probe_system_perfmeter>.sampling-settings – set sampling settings
<probe_system_perfmeter>.start – start the system-perfmeter
<probe_system_perfmeter>.status – print status of the object
<probe_system_perfmeter>.stop – stop the system-perfmeter
<probe_system_perfmeter>.summary – show total summary of probes
<probe_system_perfmeter>.table-settings – set the table settings
<probe_thread_group_histogram>.info – print information about the object
<probe_thread_group_histogram>.status – print status of the object
<probe_thread_histogram>.info – print information about the object
<probe_thread_histogram>.status – print status of the object
<probes>.info – print information about the object
<probes>.list – print table of all probes
<probes>.list-details – print detailed table of all probe instances
<probes>.new-aggregate-probe – create new aggregate probe
<probes>.new-attribute-probe – new attribute based probe
<probes>.new-fraction-object-probe – create object specific fraction probe
<probes>.new-fraction-probe – create probe fraction probe
<probes>.new-percent-probe – create new percent probe
<probes>.new-sum-probe – create new sum probe
<probes>.print-properties – print probe properties
<probes>.read – return probe value
<probes>.status – print status of the object
<probes>.subscribe – subscribe to probes
<probes>.unsubscribe – unsubscribe to probes
<process_filter>.add-pattern – filter on a specific node path pattern
<process_filter>.delete – remove the filter
<process_filter>.info – print information about the object
<process_filter>.remove-pattern – stop filtering on a process
<process_filter>.status – print status of the object
<process_histogram>.add-filter – add filter to the tool
<process_histogram>.add-instrumentation – add instrumentation
<process_histogram>.clear – clear process histogram
<process_histogram>.delete – deletes instrumentation tool
<process_histogram>.histogram – print histogram of executed processes
<process_histogram>.info – print information about the object
<process_histogram>.list-providers – list-provider objects
<process_histogram>.process-info – print detailed info on a process
<process_histogram>.remove-filter – remove filter from the tool
<process_histogram>.remove-instrumentation – remove instrumentation
<process_histogram>.status – print status of the object
<process_histogram_connection>.info – print information about the object
<process_histogram_connection>.status – print status of the object
<processor_info>.da – alias for <processor_info>.disassemble
<processor_info>.debug – get debug object
<processor_info>.disable – switch processor off
<processor_info>.disassemble – disassemble instructions
<processor_info>.enable – switch processor on
<processor_info>.enabled – get enable status
<processor_info>.examine-memory – alias for <processor_info>.x
<processor_info>.l2p – alias for <processor_info>.logical-to-physical
<processor_info>.load-binary – load binary (executable) file into memory
<processor_info>.logical-to-physical – translate logical address to physical
<processor_info>.pregs – alias for <processor_info>.print-processor-registers
<processor_info>.print-processor-registers – print cpu registers
<processor_info>.read-reg – read a register
<processor_info>.set-pc – set the program counter
<processor_info>.write-reg – write to register
<processor_info>.x – examine raw memory contents
<processor_internal>.bp-break-control-register – set break on control register access
<processor_internal>.bp-break-magic – set magic instruction break
<processor_internal>.bp-run-until-control-register – run until specified control register access
<processor_internal>.bp-run-until-magic – run until specified magic instruction occurs
<processor_internal>.bp-trace-control-register – enable tracing of control register accesses
<processor_internal>.bp-trace-magic – enable tracing of magic instructions
<processor_internal>.bp-wait-for-control-register – wait for specified control register access
<processor_internal>.bp-wait-for-magic – wait for specified magic instruction
<processor_internal>.break-cr – deprecated break on control register updates
<processor_internal>.break-cr-read – deprecated break on control register reads
<processor_internal>.trace-cr – deprecated trace control register updates
<processor_internal>.trace-cr-read – deprecated trace control register reads
<processor_internal>.unbreak-cr – deprecated break on control register updates
<processor_internal>.unbreak-cr-read – deprecated break on control register reads
<processor_internal>.untrace-cr – deprecated trace control register updates
<processor_internal>.untrace-cr-read – deprecated trace control register reads
<processor_internal>.wait-for-register-read – deprecated wait for a register read
<processor_internal>.wait-for-register-write – deprecated wait for a register write
<ps2-keyboard-mouse>.info – print information about the object
<ps2-keyboard-mouse>.status – print status of the object
<rachel>.info – print information about the object
<rachel>.status – print status of the object
<ram>.info – print information about the object
<ram>.status – print status of the object
<ram_tracer>.add-filter – add filter to the tool
<ram_tracer>.add-instrumentation – add instrumentation
<ram_tracer>.delete – deletes instrumentation tool
<ram_tracer>.disable-instrumentation – disable instrumentation
<ram_tracer>.enable-instrumentation – enable instrumentation
<ram_tracer>.info – print information about the object
<ram_tracer>.list-providers – list-provider objects
<ram_tracer>.remove-filter – remove filter from the tool
<ram_tracer>.remove-instrumentation – remove instrumentation
<ram_tracer>.status – print status of the object
<real-network-bridge>.info – print information about the object
<real-network-bridge>.status – print status of the object
<real-network-host>.info – print information about the object
<real-network-host>.status – print status of the object
<real_network_bridge_comp>.disconnect-real-network – disconnect from the real network
<real_network_bridge_comp>.info – print information about the object
<real_network_bridge_comp>.status – print status of the object
<real_network_host_comp>.disconnect-real-network – disconnect from the real network
<real_network_host_comp>.info – print information about the object
<real_network_host_comp>.status – print status of the object
<realtime>.disable – disable real-time behavior
<realtime>.enable – enable real-time behavior
<realtime>.info – print information about the object
<realtime>.status – print status of the object
<recorder>.info – print information about the object
<recorder>.playback-start – play back recorded asynchronous input
<recorder>.playback-stop – stop playback
<recorder>.recorder-save – save recorder
<recorder>.recorder-start – record asynchronous input to file
<recorder>.recorder-stop – stop recorder
<recorder>.status – print status of the object
<register_breakpoint>.break-register – add a register breakpoint
<register_breakpoint>.break-register-list – list current breakpoints
<register_breakpoint>.unbreak-register – remove a register breakpoint
<remote_sync_domain>.info – print information about the object
<remote_sync_domain>.status – print status of the object
<remote_sync_node>.info – print information about the object
<remote_sync_node>.status – print status of the object
<remote_sync_server>.info – print information about the object
<remote_sync_server>.status – print status of the object
<ripley>.info – print information about the object
<ripley>.status – print status of the object
<rn-eth-bridge-tap>.info – print information about the object
<rn-eth-bridge-tap>.status – print status of the object
<rom>.info – print information about the object
<rom>.status – print status of the object
<roy_batty>.info – print information about the object
<roy_batty>.status – print status of the object
<sample-device-c>.info – print information about the object
<sample-device-c>.simple-method – simple example method
<sample-device-c>.status – print status of the object
<sample-i3c-target>.info – print information about the object
<sample-i3c-target>.status – print status of the object
<sample-pcie-device>.info – print information about the object
<sample-pcie-device>.status – print status of the object
<sample-risc-core>.info – print information about the object
<sample-risc-core>.status – print status of the object
<sample-risc>.info – print information about the object
<sample-risc>.status – print status of the object
<sample-x86-isa-extension>.info – print information about the object
<sample-x86-isa-extension>.status – print status of the object
<sample_802_15_4_panel>.info – print information about the object
<sample_802_15_4_panel>.status – print status of the object
<sample_802_15_4_transceiver>.info – print information about the object
<sample_802_15_4_transceiver>.rm-rssi – remove RSSI value
<sample_802_15_4_transceiver>.rr – alias for <sample_802_15_4_transceiver>.rm-rssi
<sample_802_15_4_transceiver>.scr – alias for <sample_802_15_4_transceiver>.set-contention-ratio
<sample_802_15_4_transceiver>.set-contention-ratio – set contention-ratio
<sample_802_15_4_transceiver>.set-rssi – set RSSI value
<sample_802_15_4_transceiver>.set-rssi-always-drop – set rssi-always-drop
<sample_802_15_4_transceiver>.set-rssi-random-drop – set rssi-random-drop
<sample_802_15_4_transceiver>.set-rssi-random-drop-ratio – set rssi-random-drop-ratio
<sample_802_15_4_transceiver>.sr – alias for <sample_802_15_4_transceiver>.set-rssi
<sample_802_15_4_transceiver>.srad – alias for <sample_802_15_4_transceiver>.set-rssi-always-drop
<sample_802_15_4_transceiver>.srrd – alias for <sample_802_15_4_transceiver>.set-rssi-random-drop
<sample_802_15_4_transceiver>.srrdr – alias for <sample_802_15_4_transceiver>.set-rssi-random-drop-ratio
<sample_802_15_4_transceiver>.status – print status of the object
<sample_802_15_4_transceiver_comp>.info – print information about the object
<sample_802_15_4_transceiver_comp>.status – print status of the object
<sample_bitmap_panel>.info – print information about the object
<sample_bitmap_panel>.status – print status of the object
<sample_device_cpp.port>.info – print information about the object
<sample_device_cpp.port>.status – print status of the object
<sample_device_cpp>.info – print information about the object
<sample_device_cpp>.status – print status of the object
<sample_device_cpp_with_register_as_data>.info – print information about the object
<sample_device_cpp_with_register_as_data>.status – print status of the object
<sample_device_dml>.info – print information about the object
<sample_device_dml>.status – print status of the object
<sample_device_mixed>.info – print information about the object
<sample_device_mixed>.status – print status of the object
<sample_device_pkg_prio>.info – print information about the object
<sample_device_pkg_prio>.status – print status of the object
<sample_device_python>.info – print information about the object
<sample_device_python>.status – print status of the object
<sample_dma_device>.info – print information about the object
<sample_dma_device>.status – print status of the object
<sample_dma_device_cpp>.info – print information about the object
<sample_dma_device_cpp>.status – print status of the object
<sample_dynamic_connectors>.info – print information about the object
<sample_dynamic_connectors>.status – print status of the object
<sample_event_device>.info – print information about the object
<sample_event_device>.status – print status of the object
<sample_firewire_device>.info – print information about the object
<sample_firewire_device>.status – print status of the object
<sample_generic_message_device>.info – print information about the object
<sample_generic_message_device>.status – print status of the object
<sample_i2c_device>.info – print information about the object
<sample_i2c_device>.status – print status of the object
<sample_i3c_master>.info – print information about the object
<sample_i3c_master>.status – print status of the object
<sample_i3c_target_comp>.info – print information about the object
<sample_i3c_target_comp>.status – print status of the object
<sample_interrupt_device>.info – print information about the object
<sample_interrupt_device>.status – print status of the object
<sample_linux_mapper>.info – print information about the object
<sample_linux_mapper>.status – print status of the object
<sample_linux_tracker>.detect-parameters – generate settings for the sample Linux tracker
<sample_linux_tracker>.info – print information about the object
<sample_linux_tracker>.status – print status of the object
<sample_linux_tracker_comp>.detect-parameters – generate settings for the sample Linux tracker
<sample_linux_tracker_comp>.info – print information about the object
<sample_linux_tracker_comp>.status – print status of the object
<sample_notifier_cc>.info – print information about the object
<sample_notifier_cc>.status – print status of the object
<sample_notifier_dml>.info – print information about the object
<sample_notifier_dml>.status – print status of the object
<sample_pci_card>.info – print information about the object
<sample_pci_card>.status – print status of the object
<sample_pci_device>.info – print information about the object
<sample_pci_device>.print-pci-config-regs – deprecated print PCI configuration registers
<sample_pci_device>.status – print status of the object
<sample_pcie_device_comp>.info – print information about the object
<sample_pcie_device_comp>.status – print status of the object
<sample_pcie_device_old>.info – print information about the object
<sample_pcie_device_old>.print-pci-config-regs – deprecated print PCI configuration registers
<sample_pcie_device_old>.status – print status of the object
<sample_pcie_sriov_device>.info – print information about the object
<sample_pcie_sriov_device>.print-pci-config-regs – deprecated print PCI configuration registers
<sample_pcie_sriov_device>.status – print status of the object
<sample_serial_device>.info – print information about the object
<sample_serial_device>.status – print status of the object
<sample_signal_device>.info – print information about the object
<sample_signal_device>.status – print status of the object
<sample_signal_device_impl>.info – print information about the object
<sample_signal_device_impl>.status – print status of the object
<sample_system_panel_component>.info – print information about the object
<sample_system_panel_component>.status – print status of the object
<sample_timer_device>.info – print information about the object
<sample_timer_device>.status – print status of the object
<sata-controller-connector>.info – print information about the object
<sata-controller-connector>.status – print status of the object
<sata-device-connector>.info – print information about the object
<sata-device-connector>.status – print status of the object
<sata>.info – print information about the object
<sata>.status – print status of the object
<sata_cdrom_comp>.info – print information about the object
<sata_cdrom_comp>.status – print status of the object
<sata_disk_comp>.info – print information about the object
<sata_disk_comp>.status – print status of the object
<sc_export>.connections – print connections to other SystemC objects
<sc_export>.info – print information about the device
<sc_gasket_info>.gasket-info – print Simics to SystemC connection information
<sc_initiator_gasket>.disable-dmi – disable use of DMI in gasket
<sc_initiator_gasket>.enable-dmi – enable use of DMI in gasket
<sc_initiator_gasket>.info – print information about the device
<sc_initiator_gasket>.print-dmi-table – print DMI Table
<sc_initiator_gasket>.status – print status of the device
<sc_memory_profiler_control>.disable-memory-profiler – disables memory profiling
<sc_memory_profiler_control>.enable-memory-profiler – enables memory profiling
<sc_memory_profiler_control>.memory-profiler-results – show memory profiler results
<sc_object>.info – print information about the device
<sc_object>.status – print status of the device
<sc_port>.connections – print connections to other SystemC objects
<sc_port>.info – print information about the device
<sc_process>.info – print information about the device
<sc_process>.status – print status of the device
<sc_process_profiler_control>.clear-process-profiler-results – clear process profiler results
<sc_process_profiler_control>.disable-process-profiler – disable use of process profiler
<sc_process_profiler_control>.enable-process-profiler – enable use of process profiler
<sc_process_profiler_control>.process-profiler-results – show process profiler results
<sc_signal_read>.info – print information about the device
<sc_simcontext>.list-processes – lists methods and threads
<sc_version>.version – print SystemC kernel and SystemC Library version
<script-engine>.info – print information about the object
<script-engine>.status – print status of the object
<script-params>.assigned – return names of assigned parameters
<script-params>.describe – display parameter information
<script-params>.dump – dump parameter values
<script-params>.get – get parameter value
<script-params>.help – display script parameters
<script-params>.info – print information about the object
<script-params>.list – list parameter values
<script-params>.save – save parameter values
<script-params>.setdefault – set parameter value default
<script-params>.status – print status of the object
<sd_card>.info – print information about the object
<sd_card>.status – print status of the object
<sdl-console>.auto-release – get/set auto-release flag
<sdl-console>.break – break on a graphics event specified by filename
<sdl-console>.close – close console window
<sdl-console>.delete – delete breakpoint
<sdl-console>.disable-input – ignore console input
<sdl-console>.disable-visual-feedback – disable visual feedback
<sdl-console>.enable-input – enable console input
<sdl-console>.enable-visual-feedback – enable visual feedback
<sdl-console>.fullscreen-off – disable fullscreen mode
<sdl-console>.fullscreen-on – enable fullscreen mode
<sdl-console>.grab-setup – set grab button and modifier
<sdl-console>.input – send string to a console
<sdl-console>.open – open console window
<sdl-console>.refresh – refresh console
<sdl-console>.restore-window-size – restore window size
<sdl-console>.rotate-ccw – rotate console counterclockwise
<sdl-console>.rotate-cw – rotate console clockwise
<sdl-console>.save-bmp – save BMP image
<sdl-console>.save-break-xy – specify and save a graphical breakpoint
<sdl-console>.save-png – save PNG image
<sdram-memory-module>.info – print information about the object
<sdram-memory-module>.status – print status of the object
<sdram_memory_module_comp>.info – print information about the object
<sdram_memory_module_comp>.status – print status of the object
<sebastian>.info – print information about the object
<sebastian>.status – print status of the object
<selfprof>.info – print information about the object
<selfprof>.status – print status of the object
<ser-link-endpoint>.info – print information about the object
<ser-link-endpoint>.status – print status of the object
<ser-link-impl>.info – print information about the object
<ser-link-impl>.status – print status of the object
<ser_link>.info – print information about the object
<ser_link>.status – print status of the object
<server_console_comp>.info – print information about the object
<server_console_comp>.status – print status of the object
<service-node-device>.info – print information about the object
<service-node-device>.status – print status of the object
<service-node>.add-host – add host entry
<service-node>.arp – inspect and manipulate ARP table
<service-node>.delete-host – delete host entry
<service-node>.dhcp-add-pool – add DHCP pool
<service-node>.dhcp-leases – print DHCP leases
<service-node>.disable-real-dns – disable real DNS
<service-node>.disable-service – disable network service
<service-node>.enable-ftp-alg – enable FTP ALG
<service-node>.enable-real-dns – enable real DNS
<service-node>.enable-service – enable network service
<service-node>.get-ip-address-from-pool – pop an IP address from the DHCP pool
<service-node>.info – print information about the object
<service-node>.list-host-info – list host info database
<service-node>.route – show the routing table
<service-node>.set-tftp-directory – set TFTP directory
<service-node>.status – print status of the object
<service-node>.tcpip-info – show TCP/IP info
<service_node_comp>.add-connector – add a service-node connector
<service_node_comp>.add-host – add host entry
<service_node_comp>.arp – inspect and manipulate ARP table
<service_node_comp>.change-reference-clock – change the reference clock of a service-node component
<service_node_comp>.connect-to-link – connect a service-node component to a link
<service_node_comp>.delete-host – delete host entry
<service_node_comp>.dhcp-add-pool – add DHCP pool
<service_node_comp>.dhcp-leases – print DHCP leases
<service_node_comp>.disable-real-dns – disable real DNS
<service_node_comp>.disable-service – disable network service
<service_node_comp>.enable-ftp-alg – enable FTP ALG
<service_node_comp>.enable-real-dns – enable real DNS
<service_node_comp>.enable-service – enable network service
<service_node_comp>.get-ip-address-from-pool – pop an IP address from the DHCP pool
<service_node_comp>.info – print information about the object
<service_node_comp>.list-host-info – list host info database
<service_node_comp>.route – show the routing table
<service_node_comp>.route-add – add an entry to the routing table
<service_node_comp>.set-ftp-directory – set FTP root directory
<service_node_comp>.set-tftp-directory – set TFTP directory
<service_node_comp>.status – print status of the object
<service_node_comp>.tcpip-info – show TCP/IP info
<set-memory>.info – print information about the object
<set-memory>.status – print status of the object
<signal-bus>.info – print information about the object
<signal-bus>.status – print status of the object
<signal_link>.get-free-receiver-connector – return the name of an unused receiver connector
<signal_link>.get-free-sender-connector – return the name of an unused sender connector
<signal_link>.info – print information about the object
<signal_link>.status – print status of the object
<signal_link_endpoint>.info – print information about the object
<signal_link_endpoint>.status – print status of the object
<signal_link_impl>.info – print information about the object
<signal_link_impl>.status – print status of the object
<signal_to_interrupt>.info – print information about the object
<signal_to_interrupt>.status – print status of the object
<sim>.info – print information about the object
<sim>.status – print status of the object
<simics-uefi>.info – print information about the object
<simics-uefi>.status – print status of the object
<simics_nvme_comp>.add_namespace – add a namespace to the NVMe drive
<simics_nvme_comp>.info – print information about the object
<simics_nvme_comp>.status – print status of the object
<simics_nvme_controller>.info – print information about the object
<simics_nvme_controller>.status – print status of the object
<simicsfs_server>.add-client-group – add client group
<simicsfs_server>.add-path-rule – add path rule
<simicsfs_server>.check-path-rules – check path rules
<simicsfs_server>.info – print information about the object
<simicsfs_server>.list-client-groups – list client groups
<simicsfs_server>.list-clients – list SimicsFS clients
<simicsfs_server>.list-path-rules – list path rules
<simicsfs_server>.remove-client-group – remove client group
<simicsfs_server>.remove-path-rule – remove path rule
<simicsfs_server>.status – print status of the object
<simple-byte-dump>.info – print information about the object
<simple-byte-dump>.set-output-file – sets file to output to
<simple-byte-dump>.status – print status of the object
<simple-scsi-disk>.add-diff-file – add a diff file to the image
<simple-scsi-disk>.add-diff-partial-file – alias for <simple-scsi-disk>.add-partial-diff-file
<simple-scsi-disk>.add-partial-diff-file – add a partial diff file to the image
<simple-scsi-disk>.create-partition – deprecated add a partition to disk
<simple-scsi-disk>.info – information about current state of the SCSI disk
<simple-scsi-disk>.print-partition-info – deprecated print info about a pc-style partition
<simple-scsi-disk>.print-partition-table – print the partition table
<simple-scsi-disk>.save-diff-file – save diff file to disk
<simple-scsi-disk>.save-mbr-partition – save an MBR partition to a file
<simple_cache>.info – print information about the object
<simple_cache>.print-cache-content – meta content
<simple_cache>.print-statistics – print statistics
<simple_cache>.status – print status of the object
<simple_cache_tool>.add-filter – add filter to the tool
<simple_cache_tool>.add-instrumentation – add instrumentation
<simple_cache_tool>.add-l1d-cache – add level 1 data cache
<simple_cache_tool>.add-l1i-cache – add level 1 instruction cache
<simple_cache_tool>.add-l2-cache – add level 2 cache
<simple_cache_tool>.add-l3-cache – add l3
<simple_cache_tool>.add-l3-cache-slice – add level 3 slice
<simple_cache_tool>.delete – deletes instrumentation tool
<simple_cache_tool>.disable-instrumentation – disable instrumentation
<simple_cache_tool>.enable-instrumentation – enable instrumentation
<simple_cache_tool>.info – print information about the object
<simple_cache_tool>.list-caches – list connected caches
<simple_cache_tool>.list-providers – list-provider objects
<simple_cache_tool>.remove-filter – remove filter from the tool
<simple_cache_tool>.remove-instrumentation – remove instrumentation
<simple_cache_tool>.status – print status of the object
<simple_i2c_device>.info – print information about the object
<simple_i2c_device>.status – print status of the object
<simple_memory_module>.info – print information about the object
<simple_memory_module>.status – print status of the object
<simple_pcie_device>.info – print information about the object
<simple_pcie_device>.print-pci-config-regs – deprecated print PCI configuration registers
<simple_pcie_device>.status – print status of the object
<sio-w83627hf>.info – print information about the object
<sio-w83627hf>.status – print status of the object
<sja1000_can>.info – print information about the object
<sja1000_can>.status – print status of the object
<sparse-memory>.info – print information about the object
<sparse-memory>.status – print status of the object
<spi_checker>.info – print information about the object
<spi_checker>.status – print status of the object
<sr_histogram>.add-filter – add filter to the tool
<sr_histogram>.add-instrumentation – add instrumentation
<sr_histogram>.delete – deletes instrumentation tool
<sr_histogram>.disable-instrumentation – disable instrumentation
<sr_histogram>.enable-instrumentation – enable instrumentation
<sr_histogram>.info – print information about the object
<sr_histogram>.list-providers – list-provider objects
<sr_histogram>.remove-filter – remove filter from the tool
<sr_histogram>.remove-instrumentation – remove instrumentation
<sr_histogram>.status – print status of the object
<sr_ticks>.add-filter – add filter to the tool
<sr_ticks>.add-instrumentation – add instrumentation
<sr_ticks>.delete – deletes instrumentation tool
<sr_ticks>.disable-instrumentation – disable instrumentation
<sr_ticks>.enable-instrumentation – enable instrumentation
<sr_ticks>.info – print information about the object
<sr_ticks>.list-providers – list-provider objects
<sr_ticks>.remove-filter – remove filter from the tool
<sr_ticks>.remove-instrumentation – remove instrumentation
<sr_ticks>.status – print status of the object
<standard-pcie-switch>.info – print information about the object
<standard-pcie-switch>.status – print status of the object
<standard_pcie_switch_comp>.info – print information about the object
<standard_pcie_switch_comp>.press-attention-button – press the attention button of a Downstream Port
<standard_pcie_switch_comp>.status – print status of the object
<state-assertion>.add – add an object to be asserted
<state-assertion>.add-mem-lis – add a memory listener on the specified memory space
<state-assertion>.fforward – fast-forward a state assertion file when comparing
<state-assertion>.info – provide information about the state assertion
<state-assertion>.start – start trace asserting/comparing
<state-assertion>.status – provide the status of the current state assertion
<state-assertion>.stop – stop trace asserting/comparing and close the file
<static_link_connector>.info – print information about the object
<static_link_connector>.status – print status of the object
<std-firewire-bus>.info – print information about the object
<std-firewire-bus>.status – print status of the object
<std-firewire-sample-device>.info – print information about the object
<std-firewire-sample-device>.status – print status of the object
<std-service-node>.add-connector – add a service-node connector
<std-service-node>.add-host – add host entry
<std-service-node>.arp – inspect and manipulate ARP table
<std-service-node>.change-reference-clock – change the reference clock of a service-node component
<std-service-node>.connect-to-link – connect a service-node component to a link
<std-service-node>.delete-host – delete host entry
<std-service-node>.dhcp-add-pool – add DHCP pool
<std-service-node>.dhcp-leases – print DHCP leases
<std-service-node>.disable-real-dns – disable real DNS
<std-service-node>.disable-service – disable network service
<std-service-node>.enable-ftp-alg – enable FTP ALG
<std-service-node>.enable-real-dns – enable real DNS
<std-service-node>.enable-service – enable network service
<std-service-node>.get-ip-address-from-pool – pop an IP address from the DHCP pool
<std-service-node>.info – print information about the object
<std-service-node>.list-host-info – list host info database
<std-service-node>.route – show the routing table
<std-service-node>.route-add – add an entry to the routing table
<std-service-node>.set-ftp-directory – set FTP root directory
<std-service-node>.set-tftp-directory – set TFTP directory
<std-service-node>.status – print status of the object
<std-service-node>.tcpip-info – show TCP/IP info
<std-super-io>.info – print information about the object
<std-super-io>.status – print status of the object
<step>.bp-break-step – set step breakpoint
<step>.bp-run-until-step – run until specified step
<step>.bp-trace-step – enable tracing of step points
<step>.bp-wait-for-step – wait for specified step
<step>.force-step-instruction – step instructions while other processors stall
<step>.fsi – alias for <step>.force-step-instruction
<step>.fstepi – alias for <step>.force-step-instruction
<step>.sb – deprecated alias for <step>.step-break
<step>.sba – deprecated alias for <step>.step-break-absolute
<step>.step-break – deprecated set time breakpoint
<step>.step-break-absolute – deprecated set step breakpoints
<step>.wait-for-step – deprecated wait until reaching step
<step_cycle_ratio>.set-step-rate – set steps per cycle rate
<step_event_instrumentation>.bp-break-step-event – set step event break
<step_event_instrumentation>.bp-run-until-step-event – run until specified step event occurs
<step_event_instrumentation>.bp-trace-step-event – enable tracing of step events
<step_event_instrumentation>.bp-wait-for-step-event – wait for specified step event
<symdebug>.bt – deprecated alias for <symdebug>.stack-trace
<symdebug>.down – deprecated go down N stack frames
<symdebug>.f – deprecated alias for <symdebug>.frame
<symdebug>.fin – deprecated alias for <symdebug>.finish-function
<symdebug>.finish – deprecated alias for <symdebug>.finish-function
<symdebug>.finish-function – deprecated finish the current function
<symdebug>.frame – deprecated change current stack frame
<symdebug>.list – deprecated list source and/or disassemble
<symdebug>.n – deprecated alias for <symdebug>.next-line
<symdebug>.next – deprecated alias for <symdebug>.next-line
<symdebug>.next-instruction – deprecated run to the next instruction, skipping subroutine calls
<symdebug>.next-line – deprecated run to the next source line, skipping subroutine calls
<symdebug>.nexti – deprecated alias for <symdebug>.next-instruction
<symdebug>.ni – deprecated alias for <symdebug>.next-instruction
<symdebug>.reverse-next-instruction – deprecated reverse to the previous instruction, skipping subroutine calls
<symdebug>.reverse-next-line – deprecated reverse to the previous source line, skipping subroutine calls
<symdebug>.reverse-step-instruction – deprecated reverse to the previous instruction
<symdebug>.reverse-step-into – deprecated alias for <symdebug>.reverse-step-line
<symdebug>.reverse-step-into-instruction – deprecated alias for <symdebug>.reverse-step-instruction
<symdebug>.reverse-step-line – deprecated reverse to the previous source line
<symdebug>.reverse-step-out – deprecated alias for <symdebug>.uncall-function
<symdebug>.reverse-step-over – deprecated alias for <symdebug>.reverse-next-line
<symdebug>.reverse-step-over-instruction – deprecated alias for <symdebug>.reverse-next-instruction
<symdebug>.rn – deprecated alias for <symdebug>.reverse-next-line
<symdebug>.rnext – deprecated alias for <symdebug>.reverse-next-line
<symdebug>.rnexti – deprecated alias for <symdebug>.reverse-next-instruction
<symdebug>.rni – deprecated alias for <symdebug>.reverse-next-instruction
<symdebug>.rs – deprecated alias for <symdebug>.reverse-step-line
<symdebug>.rsi – deprecated alias for <symdebug>.reverse-step-instruction
<symdebug>.rstep – deprecated alias for <symdebug>.reverse-step-line
<symdebug>.rstepi – deprecated alias for <symdebug>.reverse-step-instruction
<symdebug>.s – deprecated alias for <symdebug>.step-line
<symdebug>.si – deprecated alias for <symdebug>.step-instruction
<symdebug>.stack-trace – deprecated display stack trace
<symdebug>.step – deprecated alias for <symdebug>.step-line
<symdebug>.step-instruction – deprecated run to the next instruction
<symdebug>.step-into – deprecated alias for <symdebug>.step-line
<symdebug>.step-into-instruction – deprecated alias for <symdebug>.step-instruction
<symdebug>.step-line – deprecated run to the next source line
<symdebug>.step-out – deprecated alias for <symdebug>.finish-function
<symdebug>.step-over – deprecated alias for <symdebug>.next-line
<symdebug>.step-over-instruction – deprecated alias for <symdebug>.next-instruction
<symdebug>.stepi – deprecated alias for <symdebug>.step-instruction
<symdebug>.sym-address – deprecated return the address of expression or source line
<symdebug>.sym-file – deprecated return source file for function or address
<symdebug>.sym-function – deprecated return function at a given address
<symdebug>.sym-line – deprecated return source line for function or address
<symdebug>.sym-list – deprecated list symbols
<symdebug>.sym-source – deprecated print source location for function or address
<symdebug>.sym-string – deprecated evaluate symbolic expression
<symdebug>.sym-type – deprecated return the type of a symbolic expression
<symdebug>.sym-value – deprecated evaluate symbolic expression
<symdebug>.sym-write – deprecated write value to variable
<symdebug>.ui – deprecated alias for <symdebug>.reverse-step-instruction
<symdebug>.uncall – deprecated alias for <symdebug>.uncall-function
<symdebug>.uncall-function – deprecated reverse to when the current function was called
<symdebug>.unstep-instruction – deprecated alias for <symdebug>.reverse-step-instruction
<symdebug>.up – deprecated go up N stack frames
<symdebug>.where – deprecated alias for <symdebug>.stack-trace
<sync_domain>.info – print information about the object
<sync_domain>.status – print status of the object
<system_panel_bool>.info – print information about the object
<system_panel_bool>.status – print status of the object
<system_panel_number>.info – print information about the object
<system_panel_number>.status – print status of the object
<system_panel_state_manager>.info – print information about the object
<system_panel_state_manager>.status – print status of the object
<systemc_filter>.delete – remove the filter
<systemc_filter>.info – print information about the object
<systemc_filter>.status – print status of the object
<table>.export-table-csv – print table to file in csv format
<table>.print-table – print table
<tcf-agent>.info – print information about the object
<tcf-agent>.status – print status of the object
<tcf-context-proxy>.bp-break-source-line – add breakpoint at a source code line
<tcf-context-proxy>.bp-break-source-location – add breakpoint at a location
<tcf-context-proxy>.bp-run-until-source-line – run until reaching source code line
<tcf-context-proxy>.bp-run-until-source-location – run until reaching location
<tcf-context-proxy>.bp-trace-source-line – enable tracing of source code line reaches
<tcf-context-proxy>.bp-trace-source-location – enable tracing of location reaches
<tcf-context-proxy>.bp-wait-for-source-line – wait until reaching source code line
<tcf-context-proxy>.bp-wait-for-source-location – wait until reaching location
<tcf-context-proxy>.break-line – deprecated add breakpoint at a source code line
<tcf-context-proxy>.break-location – deprecated add breakpoint at a location
<tcf-context-proxy>.info – print information about the object
<tcf-context-proxy>.run-until-line – deprecated run until reaching source code line
<tcf-context-proxy>.run-until-location – deprecated run until reaching location
<tcf-context-proxy>.status – print status of the object
<tcf-context-proxy>.wait-for-line – deprecated wait in the script branch until reaching source code line
<tcf-context-proxy>.wait-for-location – deprecated wait in the script branch until reaching location
<tcp-server>.info – print information about the object
<tcp-server>.status – print status of the object
<telemetry_manager>.info – print information about the object
<telemetry_manager>.status – print status of the object
<telnet_console>.break – set a string to break on
<telnet_console>.capture-start – capture output to file
<telnet_console>.capture-stop – stop output capture to file
<telnet_console>.disconnect – terminates the telnet session
<telnet_console>.info – print information about the object
<telnet_console>.input – send string to a console
<telnet_console>.input-file – input a file into a console
<telnet_console>.kbd-abort – send a keyboard abort signal
<telnet_console>.list-break-strings – list all active string breakpoints
<telnet_console>.playback-start – start traffic generator
<telnet_console>.playback-stop – stop traffic generation
<telnet_console>.record-start – start recording of output on the console
<telnet_console>.record-stop – stop recording of output on the console
<telnet_console>.status – print status of the object
<telnet_console>.unbreak – stop breaking on string
<telnet_console>.unbreak-id – remove a breakpoint
<telnet_console>.wait-for-string – wait for a string in a script branch
<telnet_console>.wait-then-write – wait for a string, then write an input string
<telnet_console_comp>.info – print information about the object
<telnet_console_comp>.status – print status of the object
<telnet_console_comp>.switch-to-host-serial-console – replace the console with a host serial console
<telnet_console_comp>.switch-to-text-console – replace the console with a text console
<telnet_frontend>.info – print information about the object
<telnet_frontend>.status – print status of the object
<text-console>.break – set a string to break on
<text-console>.capture-start – capture output to file
<text-console>.capture-stop – stop output capture to file
<text-console>.close – close console window
<text-console>.disable-quiet – enable output redirection
<text-console>.disable-read-only – disable read-only mode
<text-console>.enable-quiet – disable output redirection
<text-console>.enable-read-only – enable read-only mode
<text-console>.info – print information about the object
<text-console>.input – send string to a console
<text-console>.input-file – input a file into a console
<text-console>.kbd-abort – send a keyboard abort signal
<text-console>.list-break-strings – list all active string breakpoints
<text-console>.open – open console window
<text-console>.playback-start – start traffic generator
<text-console>.playback-stop – stop traffic generation
<text-console>.record-start – start recording of output on the console
<text-console>.record-stop – stop recording of output on the console
<text-console>.status – print status of the object
<text-console>.unbreak – stop breaking on string
<text-console>.unbreak-id – remove a breakpoint
<text-console>.wait-for-string – wait for a string in a script branch
<text-console>.wait-then-write – wait for a string, then write an input string
<text-frontend-winsome>.info – print information about the object
<text-frontend-winsome>.status – print status of the object
<text_console_comp>.info – print information about the object
<text_console_comp>.status – print status of the object
<text_console_comp>.switch-to-host-serial-console – replace the console with a host serial console
<text_console_comp>.switch-to-telnet-console – switch to telnet console
<text_graphics_console_comp>.info – print information about the object
<text_graphics_console_comp>.status – print status of the object
<text_graphics_console_comp>.switch-to-graphics-console – replace the console with a graphics console
<text_panel_frontend>.info – print information about the object
<text_panel_frontend>.status – print status of the object
<textcon>.break – deprecated set a string to break on
<textcon>.capture-start – capture output to file
<textcon>.capture-stop – stop output capture to file
<textcon>.disable-cmd-line-output – disable output to Simics command line
<textcon>.enable-cmd-line-output – enable output to Simics command line
<textcon>.hide – hide the console window
<textcon>.host-serial-setup – setup host serial connection
<textcon>.info – print information about the object
<textcon>.input – send input to a console
<textcon>.input-file – input a file into a console
<textcon>.list-break-strings – deprecated list all active string breakpoints
<textcon>.record-start – start recording of output on the console
<textcon>.record-stop – stop recording of output on the console
<textcon>.save-to-file – save console screen to file
<textcon>.show – display the console window
<textcon>.status – print status of the object
<textcon>.telnet-setup – setup telnet connection
<textcon>.telnet-status – return telnet connection data
<textcon>.unbreak – deprecated stop breaking on string
<textcon>.wait-for-string – deprecated wait for a string in a script branch
<textcon>.wait-then-write – deprecated wait for a string, then write an input string
<top-component>.info – print information about the object
<top-component>.status – print status of the object
<trace-sync>.disable – disable core2 hardware bug workaround
<trace-sync>.enable – enable core2 hardware bug workaround
<trace-sync>.info – print information about the object
<trace-sync>.status – print status of the object
<tracer_tool>.add-filter – add filter to the tool
<tracer_tool>.add-instrumentation – add instrumentation
<tracer_tool>.delete – deletes instrumentation tool
<tracer_tool>.disable-instrumentation – disable instrumentation
<tracer_tool>.enable-instrumentation – enable instrumentation
<tracer_tool>.info – print information about the object
<tracer_tool>.list-providers – list-provider objects
<tracer_tool>.remove-filter – remove filter from the tool
<tracer_tool>.remove-instrumentation – remove instrumentation
<tracer_tool>.status – print status of the object
<transaction>.wait-for-get – issue an inquiry read transaction and wait for it to complete
<transaction>.wait-for-read – issue a read transaction and wait for it to complete
<transaction>.wait-for-set – issue an inquiry write transaction and wait for it to complete
<transaction>.wait-for-write – issue a write transaction and wait for it to complete
<transaction_translator>.memory-map – print physical memory map
<translator>.memory-map – print physical memory map
<txt_console_comp>.info – print information about the object
<txt_console_comp>.status – print status of the object
<tyler_durden>.info – print information about the object
<tyler_durden>.status – print status of the object
<tyrell>.info – print information about the object
<tyrell>.status – print status of the object
<uart-device-connector>.info – print information about the object
<uart-device-connector>.status – print status of the object
<uart-remote-connector>.info – print information about the object
<uart-remote-connector>.status – print status of the object
<uefi_fw_mapper>.info – print information about the object
<uefi_fw_mapper>.list-modules – list loaded modules
<uefi_fw_mapper>.status – print status of the object
<uefi_fw_tracker>.detect-parameters – try to detect settings for the UEFI tracker
<uefi_fw_tracker>.info – print information about the object
<uefi_fw_tracker>.status – print status of the object
<uefi_fw_tracker_comp>.detect-parameters – try to detect settings for the UEFI tracker
<uefi_fw_tracker_comp>.info – print information about the object
<uefi_fw_tracker_comp>.list-modules – list loaded modules
<uefi_fw_tracker_comp>.status – print status of the object
<unix-socket-server>.info – print information about the object
<unix-socket-server>.status – print status of the object
<usb-device-connector>.info – print information about the object
<usb-device-connector>.status – print status of the object
<usb-disk>.info – print information about the object
<usb-disk>.status – print status of the object
<usb-host-connector>.info – print information about the object
<usb-host-connector>.status – print status of the object
<usb-tablet-comp>.info – print information about the object
<usb-tablet-comp>.status – print status of the object
<usb_disk_comp>.info – print information about the object
<usb_disk_comp>.status – print status of the object
<usb_hs_keyboard>.info – print information about the object
<usb_hs_keyboard>.key-down – send key down event
<usb_hs_keyboard>.key-press – send key event
<usb_hs_keyboard>.key-up – send key up event
<usb_hs_keyboard>.status – print status of the object
<usb_hs_keyboard_comp>.info – print information about the object
<usb_hs_keyboard_comp>.status – print status of the object
<usb_keyboard>.info – print information about the object
<usb_keyboard>.key-down – send key down event
<usb_keyboard>.key-press – send key event
<usb_keyboard>.key-up – send key up event
<usb_keyboard>.status – print status of the object
<usb_keyboard_comp>.info – print information about the object
<usb_keyboard_comp>.status – print status of the object
<usb_mouse>.info – print information about the object
<usb_mouse>.left-button – send button down/up event
<usb_mouse>.middle-button – send button down/up event
<usb_mouse>.moveto – move mouse cursor
<usb_mouse>.reset – reset mouse cursor
<usb_mouse>.right-button – send button down/up event
<usb_mouse>.status – print status of the object
<usb_mouse_comp>.info – print information about the object
<usb_mouse_comp>.status – print status of the object
<usb_tablet>.info – print information about the object
<usb_tablet>.status – print status of the object
<usb_tablet_component>.info – print information about the object
<usb_tablet_component>.status – print status of the object
<vga>.info – print information about the object
<vga>.redraw – redraw display
<vga>.refresh-rate – set refresh rate for the display
<vga>.status – print status of the object
<vga>.text-dump – print text contents of display
<vga>.wait-for-string – wait for substring in text mode
<vga_pci>.info – print information about the object
<vga_pci>.print-pci-config-regs – deprecated print PCI configuration registers
<vga_pci>.redraw – redraw display
<vga_pci>.refresh-rate – set refresh rate for the display
<vga_pci>.status – print status of the object
<vga_pci>.text-dump – print text contents of display
<vga_pci>.wait-for-string – wait for substring in text mode
<virtio-mmio-entropy>.info – print information about the object
<virtio-mmio-entropy>.status – print status of the object
<virtio_mmio_blk>.info – print information about the object
<virtio_mmio_blk>.status – print status of the object
<virtio_mmio_blk_comp>.info – print information about the object
<virtio_mmio_blk_comp>.status – print status of the object
<virtio_mmio_fs>.info – print information about the object
<virtio_mmio_fs>.status – print status of the object
<virtio_mmio_net>.info – print information about the object
<virtio_mmio_net>.status – print status of the object
<virtio_pcie_blk>.info – print information about the object
<virtio_pcie_blk>.status – print status of the object
<virtio_pcie_blk_comp>.info – print information about the object
<virtio_pcie_blk_comp>.status – print status of the object
<virtio_pcie_fs>.info – print information about the object
<virtio_pcie_fs>.status – print status of the object
<virtio_pcie_fs_comp>.info – print information about the object
<virtio_pcie_fs_comp>.status – print status of the object
<virtio_pcie_net>.info – print information about the object
<virtio_pcie_net>.status – print status of the object
<virtio_pcie_net_comp>.info – print information about the object
<virtio_pcie_net_comp>.status – print status of the object
<virtiofs_fuse>.info – print information about the object
<virtiofs_fuse>.status – print status of the object
<vmcom>.info – print information about the object
<vmcom>.status – print status of the object
<vtune_measurement>.flamegraph – produce a flamegraph (.svg) file of the profile
<vtune_measurement>.info – print information about the object
<vtune_measurement>.launch-gui – start vtune-gui on collected data
<vtune_measurement>.module-profile – show module profile of run
<vtune_measurement>.profile – show profile of run
<vtune_measurement>.save-folded-stacks – fold stacks of the profile and write it to a file
<vtune_measurement>.start – start measurement
<vtune_measurement>.status – print status of the object
<vtune_measurement>.stop – stop measurement
<vtune_measurement>.summary – show VTune summary of the run
<vtune_measurement>.thread-groups – show available thread groups
<vtune_measurement>.thread-profile – show thread profile of run
<wall_e>.info – print information about the object
<wall_e>.status – print status of the object
<x2apic_v2>.info – print information about the object
<x2apic_v2>.status – print status of the object
<x58-mb>.cmos-base-mem – set base memory size
<x58-mb>.cmos-boot-dev – set boot drive
<x58-mb>.cmos-extended-mem – set extended memory size
<x58-mb>.cmos-floppy – set floppy parameters
<x58-mb>.cmos-hd – set fixed disk parameters
<x58-mb>.cmos-info – print information about the CMOS area
<x58-mb>.cmos-init – initialize some CMOS values
<x58-mb>.info – print information about the object
<x58-mb>.status – print status of the object
<x86-reset-bus>.info – print information about the object
<x86-tlb>.info – print information about the object
<x86-tlb>.status – print status of the device
<x86>.disable-vmp – disable VMP
<x86>.enable-vmp – enable VMP
<x86>.setup-x86-timing – set timing
<x86>.vmp – query VMP status
<x86_branch_profiler>.add-filter – add filter to the tool
<x86_branch_profiler>.add-instrumentation – add instrumentation
<x86_branch_profiler>.delete – deletes instrumentation tool
<x86_branch_profiler>.disable-instrumentation – disable instrumentation
<x86_branch_profiler>.enable-instrumentation – enable instrumentation
<x86_branch_profiler>.histogram – print histogram of branches used
<x86_branch_profiler>.info – print information about the object
<x86_branch_profiler>.list-providers – list-provider objects
<x86_branch_profiler>.remove-filter – remove filter from the tool
<x86_branch_profiler>.remove-instrumentation – remove instrumentation
<x86_branch_profiler>.status – print status of the object
<x86_broadcast>.info – print information about the object
<x86_broadcast>.status – print status of the object
<x86_chassis>.info – print information about the object
<x86_chassis>.status – print status of the object
<x86_mode_filter>.add-mode – add a mode to the filter
<x86_mode_filter>.delete – add a mode to the filter
<x86_mode_filter>.info – print information about the object
<x86_mode_filter>.remove-mode – remove a mode from the filter
<x86_mode_filter>.status – print status of the object
<x86_mode_histogram>.add-filter – add filter to the tool
<x86_mode_histogram>.add-instrumentation – add instrumentation
<x86_mode_histogram>.delete – deletes instrumentation tool
<x86_mode_histogram>.disable-instrumentation – disable instrumentation
<x86_mode_histogram>.enable-instrumentation – enable instrumentation
<x86_mode_histogram>.histogram – print x86 mode histogram
<x86_mode_histogram>.info – print information about the object
<x86_mode_histogram>.list-providers – list-provider objects
<x86_mode_histogram>.remove-filter – remove filter from the tool
<x86_mode_histogram>.remove-instrumentation – remove instrumentation
<x86_mode_histogram>.status – print status of the object
<x87_exception>.info – print information about the object
<x87_exception>.status – print status of the object
<zorg>.info – print information about the object
<zorg>.status – print status of the object
a – alias for help-search
add-data-to-script-pipe – send data to a script pipe
add-directory – add a directory to the Simics search path
add-instrumentation-filter – add filter to connections
add-instrumentation-group – add new instrumentation group
add-module-directory – add a directory to the module search path
add-pathmap-entry – add a path map entry
add-session-comment – add a time-stamped user comment
add-symbol-file – add symbol file to debugging contexts
alias – add an alias
and – logical and
api-apropos – alias for api-search
api-help – get API help
api-search – search API help
apropos – alias for help-search
atoi – convert string to integer
b – deprecated alias for break
bin – display integer in binary notation
bits – bit manipulation
bookmark – alias for set-bookmark
break – deprecated set breakpoint on current processor
break-cr – deprecated break on control register updates
break-cr-read – deprecated break on control register reads
break-exception – deprecated break on CPU exceptions
break-hap – deprecated break on haps
break-io – break on device accesses
break-line – deprecated add breakpoint at a source code line
break-location – deprecated add breakpoint at a location
break-log – deprecated break on log message
break-loop – break the execution in a script loop
break-script-branch – break the execution of a script branch
bt – alias for stack-trace
c – alias for run
cb – deprecated alias for cycle-break
cba – deprecated alias for cycle-break-absolute
cc – alias for run-cycles
cd – change working directory
change-namespace – change current namespace
check-cell-partitioning – verify that cell partitioning is OK
clear-directories – clear the Simics search path
clear-io-stats – clear the device access stats
clear-memorymap – clear all memory map entries
clear-object-lock-stats – clear object lock statistics
clear-pathmap – clear all path map entries
clear-recorder – clear recorded events
cn – alias for change-namespace
collect-coverage – collect a coverage profile
command-file-history – list current CLI script stack
command-file-stack – list current CLI command file stack
command-history – show CLI command history
command-list – deprecated generate html document describing commands
connect – connect connectors
connect-components – deprecated connect components
connect-panel-to-frontend – connect panel to frontend
connect-real-network – connect a simulated machine to the real network
connect-real-network-bridge – connect bridge between real and simulated network
connect-real-network-host – connect real host to the simulated network
connect-real-network-napt – enable NAPT from simulated network
connect-real-network-port-in – setup port forwarding to a simulated machine
connect-real-network-port-out – setup port forwarding to real machine
context-query-for-object – create a context query for a Simics object
continue – alias for run
continue-cycles – alias for run-cycles
continue-loop – skip to next iteration in a script loop
continue-seconds – alias for run-seconds
copy-connector – copy object
copyright – print full Simics copyright information
cpu-pages-dump – print all pages cached by the CPU
cpu-switch-time – alias for set-time-quantum
create-and-connect-ddr-memory – deprecated create and connect memory modules to the system
create-and-connect-ddr-memory-comp – create and connect memory modules to the system
create-brody – create a non-instantiated brody
create-can-link – create a non-instantiated can_link
create-cell-and-clocks – create a non-instantiated cell-and-clocks
create-cell-and-clocks-comp – create a non-instantiated cell_and_clocks_comp
create-cp3-quad100tx – create a non-instantiated cp3_quad100tx
create-cpci-adapter – create a non-instantiated cpci_adapter
create-cpci-backplane – create a non-instantiated cpci_backplane
create-datagram-link – create a non-instantiated datagram_link
create-ddr-memory-module – create a non-instantiated ddr-memory-module
create-ddr-memory-module-comp – create a non-instantiated ddr_memory_module_comp
create-ddr2-memory-module – create a non-instantiated ddr2-memory-module
create-ddr2-memory-module-comp – create a non-instantiated ddr2_memory_module_comp
create-ddr3-memory-module – create a non-instantiated ddr3-memory-module
create-ddr3-memory-module-comp – create a non-instantiated ddr3_memory_module_comp
create-deckard – create a non-instantiated deckard
create-dummy-comp – create a non-instantiated dummy_comp
create-elliot – create a non-instantiated elliot
create-emmett – create a non-instantiated emmett
create-empty-components – create a non-instantiated empty_components
create-etg-comp – create a non-instantiated etg_comp
create-etg-panel-comp – create a non-instantiated etg_panel_comp
create-eth-injector-comp – create a non-instantiated eth_injector_comp
create-ethan – create a non-instantiated ethan
create-ethernet-cable – create a non-instantiated ethernet_cable
create-ethernet-hub – create a non-instantiated ethernet_hub
create-ethernet-switch – create a non-instantiated ethernet_switch
create-ethernet-vlan-switch – create a non-instantiated ethernet_vlan_switch
create-frankie-carbone – create a non-instantiated frankie_carbone
create-generic-pcie-switch – create a non-instantiated generic_pcie_switch
create-gertie – create a non-instantiated gertie
create-gfx-console-comp – create a non-instantiated gfx_console_comp
create-gml-link – create a non-instantiated gml_link
create-godzilla – create a non-instantiated godzilla
create-graphics-console-comp – create a non-instantiated graphics_console_comp
create-hal – create a non-instantiated hal
create-host-serial-console-comp – create a non-instantiated host_serial_console_comp
create-hunt – create a non-instantiated hunt
create-i210-comp – create a non-instantiated i210_comp
create-i2c-link-v2 – create a non-instantiated i2c_link_v2
create-i3c-cable – create a non-instantiated i3c_cable
create-i3c-link – create a non-instantiated i3c_link
create-i82571EB-v2-comp – create a non-instantiated i82571EB_v2_comp
create-i82574-v2-comp – create a non-instantiated i82574_v2_comp
create-i82576EB-v2-comp – create a non-instantiated i82576EB_v2_comp
create-i82583V-v2-comp – create a non-instantiated i82583V_v2_comp
create-ide-cdrom-comp – create a non-instantiated ide_cdrom_comp
create-ide-disk-comp – create a non-instantiated ide_disk_comp
create-ieee-802-15-4-link – create a non-instantiated ieee_802_15_4_link
create-isa-lance – create a non-instantiated isa-lance
create-isa-vga – create a non-instantiated isa-vga
create-korben – create a non-instantiated korben
create-leeloo – create a non-instantiated leeloo
create-legacy-upstream-pcie-adapter-comp – create a non-instantiated legacy_upstream_pcie_adapter_comp
create-maria-singer – create a non-instantiated maria_singer
create-marvin – create a non-instantiated marvin
create-mcfly – create a non-instantiated mcfly
create-micron-mtfc128gap-emmc-card – create a non-instantiated micron_mtfc128gap_emmc_card
create-micron-mtfc16gap-emmc-card – create a non-instantiated micron_mtfc16gap_emmc_card
create-micron-mtfc2ggqdi-emmc-card – create a non-instantiated micron_mtfc2ggqdi_emmc_card
create-micron-mtfc32gap-emmc-card – create a non-instantiated micron_mtfc32gap_emmc_card
create-micron-mtfc4gacaeam-emmc-card – create a non-instantiated micron_mtfc4gacaeam_emmc_card
create-micron-mtfc4ggqdi-emmc-card – create a non-instantiated micron_mtfc4ggqdi_emmc_card
create-micron-mtfc4ggqdi-sdhc-card – create a non-instantiated micron_mtfc4ggqdi_sdhc_card
create-micron-mtfc64gap-emmc-card – create a non-instantiated micron_mtfc64gap_emmc_card
create-micron-mtfc64ggqdi-sdhc-card – create a non-instantiated micron_mtfc64ggqdi_sdhc_card
create-micron-mtfc8gacaeam-emmc-card – create a non-instantiated micron_mtfc8gacaeam_emmc_card
create-micron-mtfc8gam-emmc-card – create a non-instantiated micron_mtfc8gam_emmc_card
create-mmc-card-comp – create a non-instantiated mmc_card_comp
create-motherboard-x86-simple – create a non-instantiated motherboard_x86_simple
create-motherboard-x86-simple-no-apic – create a non-instantiated motherboard_x86_simple_no_apic
create-ms1553-link-v2 – create a non-instantiated ms1553_link_v2
create-nemo – create a non-instantiated nemo
create-nikita – create a non-instantiated nikita
create-os-awareness – create OS awareness framework
create-pc-dual-serial-ports – create a non-instantiated pc-dual-serial-ports
create-pc-floppy-controller – create a non-instantiated pc-floppy-controller
create-pc-quad-serial-ports – create a non-instantiated pc-quad-serial-ports
create-pc-single-parallel-port – create a non-instantiated pc-single-parallel-port
create-pci-accel-vga – create a non-instantiated pci-accel-vga
create-pci-accel-vga-comp – create a non-instantiated pci_accel_vga_comp
create-pci-am79c973 – create a non-instantiated pci-am79c973
create-pci-am79c973-comp – create a non-instantiated pci_am79c973_comp
create-pci-bcm5703c – create a non-instantiated pci-bcm5703c
create-pci-bcm5703c-comp – create a non-instantiated pci_bcm5703c_comp
create-pci-bcm5704c – create a non-instantiated pci-bcm5704c
create-pci-bcm5704c-comp – create a non-instantiated pci_bcm5704c_comp
create-pci-dec21041 – create a non-instantiated pci-dec21041
create-pci-dec21041-comp – create a non-instantiated pci_dec21041_comp
create-pci-dec21140 – create a non-instantiated pci_dec21140
create-pci-dec21140-panel – create a non-instantiated pci_dec21140_panel
create-pci-dec21140a – create a non-instantiated pci-dec21140a
create-pci-dec21140a-comp – create a non-instantiated pci_dec21140a_comp
create-pci-dec21140a-dml – create a non-instantiated pci-dec21140a-dml
create-pci-dec21143 – create a non-instantiated pci-dec21143
create-pci-dec21143-comp – create a non-instantiated pci_dec21143_comp
create-pci-i21152 – create a non-instantiated pci-i21152
create-pci-i21152-comp – create a non-instantiated pci_i21152_comp
create-pci-i82543gc – create a non-instantiated pci-i82543gc
create-pci-i82543gc-comp – create a non-instantiated pci_i82543gc_comp
create-pci-i82546bg – create a non-instantiated pci-i82546bg
create-pci-i82546bg-comp – create a non-instantiated pci_i82546bg_comp
create-pci-i82559 – create a non-instantiated pci-i82559
create-pci-i82559-comp – create a non-instantiated pci_i82559_comp
create-pci-pd6729 – create a non-instantiated pci-pd6729
create-pci-pd6729-comp – create a non-instantiated pci_pd6729_comp
create-pci-tsb12lv26 – create a non-instantiated pci-tsb12lv26
create-pci-vga – create a non-instantiated pci-vga
create-pci-vga-comp – create a non-instantiated pci_vga_comp
create-pcmcia-flash-disk-comp – create a non-instantiated pcmcia_flash_disk_comp
create-phy-comp – create a non-instantiated phy_comp
create-phy-mii-transceiver – create a non-instantiated phy-mii-transceiver
create-ps2-keyboard-mouse – create a non-instantiated ps2-keyboard-mouse
create-rachel – create a non-instantiated rachel
create-real-network-bridge – create a non-instantiated real-network-bridge
create-real-network-bridge-comp – create a non-instantiated real_network_bridge_comp
create-real-network-host – create a non-instantiated real-network-host
create-real-network-host-comp – create a non-instantiated real_network_host_comp
create-ripley – create a non-instantiated ripley
create-roy-batty – create a non-instantiated roy_batty
create-sample-802-15-4-panel – create a non-instantiated sample_802_15_4_panel
create-sample-802-15-4-transceiver-comp – create a non-instantiated sample_802_15_4_transceiver_comp
create-sample-bitmap-panel – create a non-instantiated sample_bitmap_panel
create-sample-dynamic-connectors – create a non-instantiated sample_dynamic_connectors
create-sample-i3c-target-comp – create a non-instantiated sample_i3c_target_comp
create-sample-pci-card – create a non-instantiated sample_pci_card
create-sample-pcie-device-comp – create a non-instantiated sample_pcie_device_comp
create-sample-signal-device – create a non-instantiated sample_signal_device
create-sample-system-panel-component – create a non-instantiated sample_system_panel_component
create-sata-cdrom-comp – create a non-instantiated sata_cdrom_comp
create-sata-disk-comp – create a non-instantiated sata_disk_comp
create-script-barrier – create a script barrier
create-script-pipe – create a script pipe
create-sdram-memory-module – create a non-instantiated sdram-memory-module
create-sdram-memory-module-comp – create a non-instantiated sdram_memory_module_comp
create-sebastian – create a non-instantiated sebastian
create-ser-link – create a non-instantiated ser_link
create-server-console-comp – create a non-instantiated server_console_comp
create-service-node-comp – create a non-instantiated service_node_comp
create-signal-link – create a non-instantiated signal_link
create-simics-nvme-comp – create a non-instantiated simics_nvme_comp
create-simple-memory-module – create a non-instantiated simple_memory_module
create-sio-w83627hf – create a non-instantiated sio-w83627hf
create-standard-pcie-switch-comp – create a non-instantiated standard_pcie_switch_comp
create-std-firewire-bus – create a non-instantiated std-firewire-bus
create-std-firewire-sample-device – create a non-instantiated std-firewire-sample-device
create-std-service-node – create a non-instantiated std-service-node
create-std-super-io – create a non-instantiated std-super-io
create-telnet-console-comp – create a non-instantiated telnet_console_comp
create-text-console-comp – create a non-instantiated text_console_comp
create-text-graphics-console-comp – create a non-instantiated text_graphics_console_comp
create-txt-console-comp – create a non-instantiated txt_console_comp
create-tyler-durden – create a non-instantiated tyler_durden
create-tyrell – create a non-instantiated tyrell
create-unconnected-ethernet-probe – create an unconnected probe
create-usb-disk – create a non-instantiated usb-disk
create-usb-disk-comp – create a non-instantiated usb_disk_comp
create-usb-hs-keyboard-comp – create a non-instantiated usb_hs_keyboard_comp
create-usb-keyboard-comp – create a non-instantiated usb_keyboard_comp
create-usb-mouse-comp – create a non-instantiated usb_mouse_comp
create-usb-tablet-comp – create a non-instantiated usb-tablet-comp
create-usb-tablet-component – create a non-instantiated usb_tablet_component
create-virtio-mmio-blk-comp – create a non-instantiated virtio_mmio_blk_comp
create-virtio-pcie-blk-comp – create a non-instantiated virtio_pcie_blk_comp
create-virtio-pcie-fs-comp – create a non-instantiated virtio_pcie_fs_comp
create-virtio-pcie-net-comp – create a non-instantiated virtio_pcie_net_comp
create-wall-e – create a non-instantiated wall_e
create-x86-chassis – create a non-instantiated x86_chassis
create-zorg – create a non-instantiated zorg
current-namespace – return current namespace
current-processor – deprecated return current processor
cycle-break – deprecated set cycle breakpoint
cycle-break-absolute – deprecated set absolute cycle breakpoint
da – alias for disassemble
date – host time and date
debug-context – return the current debug object
dec – display integer in decimal notation
decl – declare parameter
default-port-forward-target – set default port forwarding target
defined – variable defined
delete – deprecated remove breakpoints
delete-bookmark – delete a time bookmark
delete-connector – delete connector copy
dev-reg-info – deprecated use print-device-reg-info instead
dev-reg-list – deprecated use print-device-regs instead
devs – list all mapped devices in Simics
digit-grouping – set or show output formatting for numbers
dirs – display directory stack
disable – deprecated enable/disable breakpoint
disable-cell-threading – deprecated deprecated
disable-debugger – get debug object
disable-hypersim – disable hypersimulation
disable-instrumentation – disable instrumentation
disable-jit – disable JIT compilation for all JIT-capable processors
disable-magic-breakpoint – deprecated remove breakpoint on magic break instructions
disable-mca – alias for disable-multicore-accelerator
disable-mtprof – disable mtprof data collection
disable-multicore-accelerator – disable mca
disable-multimachine-accelerator – deprecated deprecated
disable-multithreading – disable multithreading
disable-object-lock-stats – disable object lock statistics collection
disable-page-sharing – disable page-sharing
disable-real-time-mode – disable real-time behavior
disable-reverse-execution – disable reverse execution
disable-subsystem-threading – deprecated
disable-tech-preview – disable tech preview for feature
disable-unsupported-feature – disable unsupported feature
disable-vmp – disable VMP for all x86 processors
disable-vmp-feature – disable VMP feature
disassemble – disassemble instructions
disassemble-settings – change disassembly output settings
disconnect – disconnect connectors
disconnect-real-network – disconnect from the real network
disconnect-real-network-port-in – remove port forwarding to a simulated machine
disconnect-real-network-port-out – remove port forwarding to real machine
display – print expression at prompt
down – go down N stack frames
dstc-disable – disable D-STC
dstc-enable – enable D-STC
echo – print a value
else – run a block conditionally
enable – deprecated enable/disable breakpoint
enable-cell-threading – deprecated deprecated
enable-debugger – enable command line debugger
enable-hypersim – enable hypersimulation
enable-instrumentation – enable instrumentation
enable-jit – enable JIT compilation for all JIT-capable processors
enable-magic-breakpoint – deprecated set breakpoint on magic break instructions
enable-mca – alias for enable-multicore-accelerator
enable-mtprof – enable multithreaded simulation profiling
enable-multicore-accelerator – enable multicore-accelerator
enable-multimachine-accelerator – deprecated deprecated
enable-multithreading – enable multithreaded simulation
enable-object-lock-stats – enable object lock statistics collection
enable-page-sharing – enable page-sharing
enable-probes – enable probe framework
enable-real-time-mode – enable real-time behavior
enable-reverse-execution – enable reverse execution
enable-subsystem-threading – enable cell threading
enable-tech-preview – enable tech preview for feature
enable-unsupported-feature – enable unsupported feature
enable-vmp – enable VMP for all VMP-capable processors
enable-vmp-feature – enable VMP feature
enable-writable-persistent-state – create/load a R/W persistent state
env – return environment variable value
ethereal – alias for wireshark
ethereal-stop – alias for wireshark-stop
examine-memory – alias for x
except – catch error from block of code
exec – execute a string as a CLI command
exit – alias for quit
expect – fail if not equal
f – alias for frame
file-exists – check if a file exists in the search path
fin – alias for finish-function
finish – alias for finish-function
finish-function – finish the current function
force-step-instruction – step instructions while other processors stall
foreach – run code with iterator
frame – change current stack frame
fsi – alias for force-step-instruction
fstepi – alias for force-step-instruction
get – get value of physical address
get-auto-mac-address – get an unused MAC address
get-breakpoint-list – deprecated return list of all breakpoints
get-class-list – deprecated return a list all configuration classes
get-command-args – get list of command arguments
get-component-list – deprecated return component list
get-device-offset – read from an offset in a device bank
get-device-reg – read from a register in a device bank
get-error-command – return the name of command causing error
get-error-file – return the file name of the CLI command error
get-error-line – return the file line number of the CLI command error
get-error-message – return the message for an error
get-object-list – deprecated return a list of all objects
get-simics-search-path – deprecated deprecated
h – alias for help
help – help command
help-search – search for text in documentation
hex – display integer in hexadecimal notation
hl – alias for list-haps
hypersim-status – show hypersim status
ib – deprecated alias for list-breakpoints
if – run a block conditionally
ifm – alias for instruction-fetch-mode
ignore – deprecated set ignore count for a breakpoint
in-list – check for occurrence in list
in-string – check for substring in string
info-breakpoints – deprecated alias for list-breakpoints
insert-ethernet-probe – insert Ethernet probe
insert-ieee-802-15-4-probe – insert IEEE 802.15.4 probe
instantiate-components – instantiate components
instruction-fetch-mode – set or get current mode for instruction fetching
instrumentation-move – reorder instrumentation connections
instrumentation-order – list instrumentation order for object
int-to-double-float – interpret integer as 64-bit floating point
int-to-extended-double-float – interpret integer as 80-bit floating point
int-to-quad-float – interpret integer as 128-bit floating point
int-to-single-float – interpret integer as 32-bit floating point
interrupt-script – interrupt script execution
interrupt-script-branch – interrupt the execution of a script branch
io-stats – alias for print-device-access-stats
iostc-disable – disable IO-STC
iostc-enable – enable IO-STC
istc-disable – disable I-STC
istc-enable – enable or disable internal caches
l – list namespace objects
l2p – alias for logical-to-physical
license – print Simics license
list – list source and/or disassemble
list-attributes – list all attributes
list-blueprint-params – list blueprint parameters
list-bookmarks – list time bookmarks
list-breakpoints – deprecated print information about breakpoints
list-checkpoints – list checkpoints
list-classes – list all configuration classes
list-commands – list CLI commands
list-components – print components
list-debug-contexts – list debug contexts
list-device-regs – find registers by name
list-directories – list directories in Simics search path
list-failed-modules – list the modules that are not loadable
list-hap-callbacks – lists all hap callbacks
list-haps – lists all haps
list-hypersim-patterns – list available hypersim patterns
list-instrumentation – list established instrumentation connections
list-instrumentation-callbacks – list instrumentation callbacks
list-instrumentation-groups – list instrumentation groups
list-instrumentation-tools – list existing instrumentation tools
list-interfaces – list all interfaces
list-length – returns the length of a list
list-modules – list loadable modules
list-namespaces – deprecated list all namespaces
list-notifier-subscribers – list added notifier subscribers
list-notifiers – list available notifiers
list-object-references – list attributes that references 'object'
list-objects – list objects
list-objects-with-interface – deprecated print configuration objects implementing an interface
list-packages – list package info in search path order
list-pcie-hierarchies – list PCIe hierarchies in the system
list-persistent-images – show information about images with "persistent" data
list-port-forwarding-setup – view the port forwarding setup
list-preferences – list preferences
list-presets – list available presets
list-prioritized-packages – list packages marked as prioritized
list-processors – list processors
list-processors-summary – prints a summary for processors
list-script-branches – list all script branches
list-sections – lists the relocatable sections of a symbol file
list-segments – lists the segments of a symbol file
list-session-comments – list all time-stamped session comments
list-simics-search-paths – return %simics% search paths
list-targets – list available targets
list-telemetry-classes – list telemetry classes
list-thread-domains – list thread domains
list-transactions – list deferred transactions
list-variables – list CLI variables
list-vars – alias for list-variables
ll – list namespace objects
load-binary – load binary (executable) file into memory
load-coverage – load coverage from file
load-file – load file into memory
load-intel-hex – load Intel HEX file into memory
load-intel-obj – load Intel .obj or .32.obj file into memory
load-module – load module into Simics
load-persistent-state – load persistent state
load-target – load a target system
local – define a local variable
log – print log entries for all objects
log-filter – suppress log messages for the object
log-group – enable/disable a log group
log-level – set or get the log level
log-setup – configure log behavior
log-size – set log buffer size
log-type – set or get the current log types
logical-to-physical – translate logical address to physical
lookup-file – lookup a filename
ls – list files
magic-breakpoint-enabled – deprecated return TRUE if the magic breakpoint is enabled
man – alias for help
match-string – compare string with a pattern and return matches
max – max
mca-status – alias for multicore-accelerator-status
memory-map – print physical memory map
min – min
module-list – alias for list-modules
module-list-failed – alias for list-failed-modules
module-list-refresh – create a new list of loadable modules
move-object – move object
multicore-accelerator-status – print multicore accelerator status
multimachine-accelerator-status – deprecated deprecated
n – alias for next-line
native-path – convert a filename to host native form
new-attr-meter – create an attribute meter
new-bank-coverage-tool – create a new bank_coverage_tool object
new-bank-patch-tool – create a new bank_patch_tool object
new-branch-recorder – create a new branch recorder
new-brody – create an instantiated brody
new-can-link – create an instantiated can_link
new-cdrom-image – create new cdrom-image object
new-cell-and-clocks – create an instantiated cell-and-clocks
new-cell-and-clocks-comp – create an instantiated cell_and_clocks_comp
new-context – create a new context
new-cp3-quad100tx – create an instantiated cp3_quad100tx
new-cpci-adapter – create an instantiated cpci_adapter
new-cpci-backplane – create an instantiated cpci_backplane
new-cpu-mode-filter – filter on certain modes (user/supervisor/hypervisor)
new-cycle-staller – create new cycle staller
new-datagram-link – create an instantiated datagram_link
new-ddr-memory-module-comp – create an instantiated ddr_memory_module_comp
new-ddr2-memory-module-comp – create an instantiated ddr2_memory_module_comp
new-ddr3-memory-module-comp – create an instantiated ddr3_memory_module_comp
new-deckard – create an instantiated deckard
new-dummy-comp – create an instantiated dummy_comp
new-elliot – create an instantiated elliot
new-emmett – create an instantiated emmett
new-empty-components – create an instantiated empty_components
new-etg-comp – create an instantiated etg_comp
new-etg-panel-comp – create an instantiated etg_panel_comp
new-eth-injector-comp – create an instantiated eth_injector_comp
new-ethan – create an instantiated ethan
new-ethernet-cable – create an instantiated ethernet_cable
new-ethernet-hub – create an instantiated ethernet_hub
new-ethernet-switch – create an instantiated ethernet_switch
new-ethernet-vlan-switch – create an instantiated ethernet_vlan_switch
new-event-histogram – create a new event_histogram object
new-exception-histogram – create a new exception_histogram object
new-frankie-carbone – create an instantiated frankie_carbone
new-gdb-remote – create a gdb session
new-generic-pcie-switch – create an instantiated generic_pcie_switch
new-gertie – create an instantiated gertie
new-gfx-console-comp – create an instantiated gfx_console_comp
new-gml-link – create an instantiated gml_link
new-godzilla – create an instantiated godzilla
new-graphics-console-comp – create an instantiated graphics_console_comp
new-hal – create an instantiated hal
new-hap-meter – create a new hap meter
new-host-serial-console-comp – create an instantiated host_serial_console_comp
new-hunt – create an instantiated hunt
new-i210-comp – create an instantiated i210_comp
new-i2c-link-v2 – create an instantiated i2c_link_v2
new-i3c-cable – create an instantiated i3c_cable
new-i3c-link – create an instantiated i3c_link
new-ide-cdrom-comp – create an instantiated ide_cdrom_comp
new-ide-disk-comp – create an instantiated ide_disk_comp
new-ieee-802-15-4-link – create an instantiated ieee_802_15_4_link
new-instruction-count – create a new instruction_count object
new-instruction-histogram – create a new instruction_histogram object
new-korben – create an instantiated korben
new-leeloo – create an instantiated leeloo
new-legacy-upstream-pcie-adapter-comp – create an instantiated legacy_upstream_pcie_adapter_comp
new-maria-singer – create an instantiated maria_singer
new-marvin – create an instantiated marvin
new-mcfly – create an instantiated mcfly
new-mem-traffic-meter – create a memory traffic meter
new-memory-profiler – create a new memory_profiler object
new-micron-mtfc128gap-emmc-card – create an instantiated micron_mtfc128gap_emmc_card
new-micron-mtfc16gap-emmc-card – create an instantiated micron_mtfc16gap_emmc_card
new-micron-mtfc2ggqdi-emmc-card – create an instantiated micron_mtfc2ggqdi_emmc_card
new-micron-mtfc32gap-emmc-card – create an instantiated micron_mtfc32gap_emmc_card
new-micron-mtfc4gacaeam-emmc-card – create an instantiated micron_mtfc4gacaeam_emmc_card
new-micron-mtfc4ggqdi-emmc-card – create an instantiated micron_mtfc4ggqdi_emmc_card
new-micron-mtfc4ggqdi-sdhc-card – create an instantiated micron_mtfc4ggqdi_sdhc_card
new-micron-mtfc64gap-emmc-card – create an instantiated micron_mtfc64gap_emmc_card
new-micron-mtfc64ggqdi-sdhc-card – create an instantiated micron_mtfc64ggqdi_sdhc_card
new-micron-mtfc8gacaeam-emmc-card – create an instantiated micron_mtfc8gacaeam_emmc_card
new-micron-mtfc8gam-emmc-card – create an instantiated micron_mtfc8gam_emmc_card
new-mmc-card-comp – create an instantiated mmc_card_comp
new-motherboard-x86-simple – create an instantiated motherboard_x86_simple
new-motherboard-x86-simple-no-apic – create an instantiated motherboard_x86_simple_no_apic
new-ms1553-link-v2 – create an instantiated ms1553_link_v2
new-nemo – create an instantiated nemo
new-nikita – create an instantiated nikita
new-os-awareness – create OS awareness framework
new-pci-accel-vga-comp – create an instantiated pci_accel_vga_comp
new-pci-am79c973-comp – create an instantiated pci_am79c973_comp
new-pci-bcm5703c-comp – create an instantiated pci_bcm5703c_comp
new-pci-bcm5704c-comp – create an instantiated pci_bcm5704c_comp
new-pci-dec21041-comp – create an instantiated pci_dec21041_comp
new-pci-dec21140 – create an instantiated pci_dec21140
new-pci-dec21140-panel – create an instantiated pci_dec21140_panel
new-pci-dec21140a-comp – create an instantiated pci_dec21140a_comp
new-pci-dec21143-comp – create an instantiated pci_dec21143_comp
new-pci-i21152-comp – create an instantiated pci_i21152_comp
new-pci-i82543gc-comp – create an instantiated pci_i82543gc_comp
new-pci-i82546bg-comp – create an instantiated pci_i82546bg_comp
new-pci-i82559-comp – create an instantiated pci_i82559_comp
new-pci-pd6729-comp – create an instantiated pci_pd6729_comp
new-pci-vga-comp – create an instantiated pci_vga_comp
new-pcmcia-flash-disk-comp – create an instantiated pcmcia_flash_disk_comp
new-phy-comp – create an instantiated phy_comp
new-probe-monitor – create new probe-monitor
new-probe-streamer – create new probe-streamer
new-process-filter – filter on certain processes
new-process-histogram – create a new process_histogram object
new-rachel – create an instantiated rachel
new-ram-tracer – create a new ram_tracer object
new-real-network-bridge – create an instantiated real-network-bridge
new-real-network-bridge-comp – create an instantiated real_network_bridge_comp
new-real-network-host – create an instantiated real-network-host
new-real-network-host-comp – create an instantiated real_network_host_comp
new-ripley – create an instantiated ripley
new-roy-batty – create an instantiated roy_batty
new-sample-802-15-4-panel – create an instantiated sample_802_15_4_panel
new-sample-802-15-4-transceiver-comp – create an instantiated sample_802_15_4_transceiver_comp
new-sample-bitmap-panel – create an instantiated sample_bitmap_panel
new-sample-dynamic-connectors – create an instantiated sample_dynamic_connectors
new-sample-i3c-target-comp – create an instantiated sample_i3c_target_comp
new-sample-pci-card – create an instantiated sample_pci_card
new-sample-pcie-device-comp – create an instantiated sample_pcie_device_comp
new-sample-signal-device – create an instantiated sample_signal_device
new-sample-system-panel-component – create an instantiated sample_system_panel_component
new-sample-x86-isa-extension – create a new sample ISA extension for x86
new-sata-cdrom-comp – create an instantiated sata_cdrom_comp
new-sata-disk-comp – create an instantiated sata_disk_comp
new-sdram-memory-module-comp – create an instantiated sdram_memory_module_comp
new-sebastian – create an instantiated sebastian
new-ser-link – create an instantiated ser_link
new-server-console-comp – create an instantiated server_console_comp
new-service-node-comp – create an instantiated service_node_comp
new-signal-link – create an instantiated signal_link
new-simics-nvme-comp – create an instantiated simics_nvme_comp
new-simple-cache-tool – create a new simple_cache_tool object
new-simple-memory-module – create an instantiated simple_memory_module
new-sr-histogram – create a new sr_histogram object
new-sr-ticks – create a new sr_ticks object
new-standard-pcie-switch-comp – create an instantiated standard_pcie_switch_comp
new-std-firewire-bus – create an instantiated std-firewire-bus
new-std-firewire-sample-device – create an instantiated std-firewire-sample-device
new-std-service-node – create an instantiated std-service-node
new-system-perfmeter – create new system-perfmeter
new-systemc-filter – filter on specified SystemC objects
new-tcf-agent – create a tcf agent
new-telnet-console-comp – create an instantiated telnet_console_comp
new-text-console-comp – create an instantiated text_console_comp
new-text-graphics-console-comp – create an instantiated text_graphics_console_comp
new-time-server – create a new time server
new-tracer – deprecated create a new tracer
new-tracer-tool – create a new tracer_tool object
new-txt-console-comp – create an instantiated txt_console_comp
new-tyler-durden – create an instantiated tyler_durden
new-tyrell – create an instantiated tyrell
new-usb-disk – create an instantiated usb-disk
new-usb-disk-comp – create an instantiated usb_disk_comp
new-usb-disk-from-image – deprecated create new usb disk from file
new-usb-hs-keyboard-comp – create an instantiated usb_hs_keyboard_comp
new-usb-keyboard-comp – create an instantiated usb_keyboard_comp
new-usb-mouse-comp – create an instantiated usb_mouse_comp
new-usb-tablet-comp – create an instantiated usb-tablet-comp
new-usb-tablet-component – create an instantiated usb_tablet_component
new-virtio-mmio-blk-comp – create an instantiated virtio_mmio_blk_comp
new-virtio-pcie-blk-comp – create an instantiated virtio_pcie_blk_comp
new-virtio-pcie-fs-comp – create an instantiated virtio_pcie_fs_comp
new-virtio-pcie-net-comp – create an instantiated virtio_pcie_net_comp
new-wall-e – create an instantiated wall_e
new-x86-branch-profiler – create a new x86_branch_profiler object
new-x86-chassis – create an instantiated x86_chassis
new-x86-mode-filter – filter on different execution modes
new-x86-mode-histogram – create a new x86_mode_histogram object
new-zorg – create an instantiated zorg
next – alias for next-line
next-instruction – run to the next instruction, skipping subroutine calls
next-line – run to the next source line, skipping subroutine calls
nexti – alias for next-instruction
ni – alias for next-instruction
not – logical not
object-exists – check if object exists
object-lock-stats – deprecated deprecated
oct – display integer in octal notation
or – logical or
output-file-start – deprecated send output to file
output-file-stop – deprecated stop sending output to file
output-radix – change the default output radix
p – alias for print
pbs – alias for print-blueprint-state
pcap-dump – dump Ethernet traffic to file
pcap-dump-stop – stop the current dump
pcapdump – alias for pcap-dump
pcapdump-stop – alias for pcap-dump-stop
pdisable – switch processor off
penable – switch processor on
peq – alias for print-event-queue
pid – print pid of Simics process
pipe – run commands through a pipe
popd – pop directory from directory stack
pow – power of
pregs – alias for print-processor-registers
print – display integer in various bases
print-blueprint-state – print blueprint state
print-device-access-stats – list most frequently accessed devices
print-device-reg-info – print detailed information of device registers
print-device-regs – list registers in a bank
print-event-queue – print event queue for processor
print-image-memory-stats – image memory usage statistics
print-object-lock-stats – print object lock statistics
print-processor-registers – print cpu registers
print-realtime-queue – list all callbacks in the realtime event queue
print-target-info – prints target information
print-time – print number of steps and cycles executed
probe-address – find destination for an address
processor-status – show processors' status
psel – alias for pselect
pselect – get or set the currently selected processor/clock
pstatus – alias for processor-status
ptime – alias for print-time
pushd – push directory on directory stack
pwd – print working directory
python – evaluate a Python expression
python-mode – switch to Python mode in the command line
q – alias for quit
quit – quit from Simics
r – alias for run
range – create and return a list of integers
rc – alias for run-cycles
read-configuration – load a saved configuration
read-device-offset – read from an offset in a device bank
read-device-reg – read from a register in a device bank
read-reg – read a register
read-variable – value of a named variable
real-time-mode – query for real-time mode
record-session – save configuration including a recording
release-notes – display product release notes
remove-instrumentation – remove instrumentation
remove-instrumentation-filter – remove instrumentation filter
remove-instrumentation-group – remove an instrumentation group
remove-symbol-file – remove symbol file from debugging contexts
replace-consoles – replace old consoles with new
resolve-file – alias for lookup-file
restart-simics – restart the current simics session
rev – alias for reverse
reverse – run simulation backwards
reverse-cycles – run simulation backwards
reverse-next-instruction – reverse to the previous instruction, skipping subroutine calls
reverse-next-line – reverse to the previous source line, skipping subroutine calls
reverse-step-instruction – reverse step one or more instruction
reverse-step-into – alias for reverse-step-line
reverse-step-line – reverse to the previous source line
reverse-step-out – alias for uncall-function
reverse-step-over – alias for reverse-next-line
reverse-step-over-instruction – alias for reverse-next-instruction
reverse-to – set a temporary time breakpoint and run backwards
revto – alias for reverse-to
rexec-limit – tune reverse execution performance parameters
rlimit – alias for rexec-limit
rn – alias for reverse-next-line
rnext – alias for reverse-next-line
rnexti – alias for reverse-next-instruction
rni – alias for reverse-next-instruction
rs – alias for reverse-step-line
rstep – alias for reverse-step-line
rstepi – alias for reverse-step-instruction
run – start execution
run-command-file – execute a simics script
run-cycles – start execution
run-python-file – execute Python file
run-script – run a script file
run-seconds – execute for seconds
run-until-line – deprecated run until reaching source code line
run-until-location – deprecated run until reaching location
s – alias for step-line
save-component-template – save a component configuration template
save-file – save memory contents to a binary file
save-image-contents – save image to disk
save-image-diff – save changes since last checkpoint
save-intel-32-obj – save memory contents to an Intel .32.obj file
save-intel-hex – save memory contents to an Intel HEX file
save-intel-obj – save memory contents to an Intel .obj file
save-persistent-state – save persistent simulator state
save-preferences – save preferences
save-recorded-session – save recorded session as a checkpoint
sb – deprecated alias for step-break
sba – deprecated alias for step-break-absolute
sc – alias for step-cycle
script-barrier-limit – manipulate the script barrier limit
script-branch – start a script branch
script-pipe-has-data – check if script pipe contains data
search – alias for help-search
set – set physical address to specified value
set-bookmark – set a bookmark at the current point in time
set-context – set the current context of a CPU
set-device-offset – write at an offset in a device bank
set-device-reg – write to a register in a device bank
set-image-memory-limit – limit image memory usage
set-max-time-span – set threading mode
set-memory-limit – deprecated deprecated
set-min-latency – set the min latency of the sync domain
set-pattern – deprecated set an instruction pattern for a breakpoint
set-pc – set the current processor's program counter
set-prefix – deprecated set a syntax prefix for a breakpoint
set-prioritized-package – mark package as prioritized
set-substr – deprecated set a syntax substring for a breakpoint
set-thread-limit – limit the number of simulation threads
set-threading-mode – set threading mode
set-time-quantum – set time quantum
setup-x86-timing – set timing for all x86 processors
shell – execute a shell command
show-memorymap – show the current memory map
show-pathmap – show the current path map
si – alias for step-instruction
signed – interpret unsigned integer as signed
signed16 – interpret unsigned integer as signed
signed32 – interpret unsigned integer as signed
signed64 – interpret unsigned integer as signed
signed8 – interpret unsigned integer as signed
simulation-replaying – check if simulation is replaying
simulation-reversing – check if simulation is reversing
simulation-running – check if simulation is running
skip-to – skip to the specified point in the simulation
split-string – split string based on its type
stack-trace – display stack trace
start-agent-manager – create and enable a Matic agent manager
start-command-line-capture – send output to file
start-eclipse-backend – start accepting connections from Eclipse
start-magic-pipe – create and enable a Magic communication pipe
start-pipe-manager – create and enable the Magic pipe manager
start-playback – play back previously recorded input from a file
start-recording – record all asynchronous input to file
start-simicsfs-server – create and connect the SimicsFS server
state-assertion-connect – connect to a state-assertion receiver
state-assertion-create-file – record a state assertion file
state-assertion-open-file – open a state assertion file for comparing
state-assertion-receive – wait for a connection from a state assertion sender
state-assertion-simple-assert – assert the file
state-assertion-simple-record – record the state of an object every x steps
stc-status – show I- and D-STC status
step – alias for step-line
step-break – deprecated set time breakpoint
step-break-absolute – deprecated set step breakpoints
step-cycle – step one or more cycles
step-instruction – step one or more instructions
step-into – alias for step-line
step-line – run to the next source line
step-out – alias for finish-function
step-over – alias for next-line
step-over-instruction – alias for next-instruction
stepi – alias for step-instruction
stop – interrupt simulation
stop-command-line-capture – stop sending output to file
stop-playback – stop playback of asynchronous input from a file
stop-recording – stop recording of session or asynchronous input
string-length – returns the length of a string in bytes
switch-mouse-to-tablet – switch relative mouse to absolute tablet
sym-address – return the address of expression or source line
sym-file – return source file for function or address
sym-function – return function at a given address
sym-line – return source line for function or address
sym-list – list symbols
sym-source – print source location for function or address
sym-string – evaluate symbolic expression
sym-type – return the type of a symbolic expression
sym-value – evaluate symbolic expression
sym-write – write value to variable
sync-info – print synchronization configuration
system-info – system info
system-perfmeter – activate Simics performance monitoring
system-perfmeter-summary – prints system-perfmeter summary
table-border-style – set table border style
tcpdump – run the tcpdump program
tcpdump-stop – stop the current tcpdump capture
telnet-frontend – enable telnet access to the command line
trace-breakpoint – deprecated trace breakpoints
trace-cr – deprecated trace control register updates
trace-cr-read – deprecated trace control register reads
trace-exception – deprecated trace exceptions
trace-hap – deprecated trace haps
trace-io – trace device accesses
trace-io-setup – show or specify byte order
try – runs a block of commands and catches any error
unbreak – deprecated remove breakpoint range
unbreak-cr – deprecated break on control register updates
unbreak-cr-read – deprecated break on control register reads
unbreak-exception – deprecated break on CPU exceptions
unbreak-hap – deprecated break on haps
unbreak-io – break on device accesses
unbreak-log – deprecated remove a log message break
uncall – alias for uncall-function
uncall-function – reverse to when the current function was called
undisplay – remove expression installed by display
unset – remove a CLI variable
unsigned – interpret an integer as unsigned 64-bit
unsigned16 – interpret an integer as unsigned 16-bit
unsigned32 – interpret an integer as unsigned 32-bit
unsigned64 – interpret an integer as unsigned 64-bit
unsigned8 – interpret an integer as unsigned 8-bit
unstep-instruction – alias for reverse-step-instruction
untrace-breakpoint – deprecated trace breakpoints
untrace-cr – deprecated trace control register updates
untrace-cr-read – deprecated trace control register reads
untrace-exception – deprecated trace exceptions
untrace-hap – deprecated trace haps
untrace-io – trace device accesses
up – go up N stack frames
version – display Simics version
vmp-feature-status – show VMP feature settings
vmp-version – print VMP version information
wait-for-breakpoint – deprecated wait for a memory breakpoint to trigger
wait-for-get – issue an inquiry read transaction and wait for it to complete
wait-for-global-sync – wait until the global time in all cells is synchronized
wait-for-global-time – wait until reaching a specified global time
wait-for-hap – deprecated wait until hap occurs
wait-for-io-break – wait for IO activity
wait-for-line – deprecated wait in the script branch until reaching source code line
wait-for-location – deprecated wait in the script branch until reaching location
wait-for-log – deprecated wait until a log message is generated
wait-for-notifier – deprecated wait until notifier occurs
wait-for-read – issue a read transaction and wait for it to complete
wait-for-script-barrier – wait until enough branches have reached a barrier
wait-for-script-pipe – wait until there is data on a script pipe
wait-for-set – issue an inquiry write transaction and wait for it to complete
wait-for-shell – execute a shell command and wait for it to finish
wait-for-simulation-started – wait for simulation to start
wait-for-simulation-stopped – wait for simulation to stop
wait-for-write – issue a write transaction and wait for it to complete
where – alias for stack-trace
while – run a block while true
whitelist-old-component – add old component class to deprecation whitelist
win-about – information on GUI load failure
wireshark – run the wireshark/ethereal program
wireshark-stop – stop the current wireshark capture
write-configuration – save configuration
write-device-offset – write at an offset in a device bank
write-device-reg – write to a register in a device bank
write-reg – write to register
x – examine raw memory contents

x 4 Components